To remove the wireless card Dayuan 5G. Remove the 8 screws securing the base cover. Pry the cover away from the recess points near the hinges. Pry the cover off the system. Identify the wireless card, pry and remove the W1 shield cover from the system. Loosen the screw securing the card. Unlatch the card bracket off the system board. Disconnect the cables. Lift the card out of the system.
To reinstall the wireless card, align the notch on the card with the tab on the slot. Slide the card firmly into the slot. Connect the antenna cables to the connectors on the card. Place the 5GW1 card bracket, re-tighten the screw to secure it. Place the card shield over the card and secure it. Place the base cover on the system and tighten the eight screws.
