1. Close the display and turn the computer over.
2. Starting at the indicator on the base-cover assembly, turn the system badge over.
3. Using a Phillips screwdriver, remove the screws beneath the system badge.
4. Using a T5 screwdriver, remove the screws from the base-cover assembly.
5. Slide the tabs on the system badge into the slots on the base-cover assembly and snap the system badge into place.
6. Starting from the back of the computer, pry the base-cover assembly, turn the base-cover assembly over, and place it on the palm-rest assembly.
7. Lift the connector latch and, using the pull-tab, disconnect the battery-LED-board cable from the system board.
8. Remove the battery-LED board from the base cover. See "Removing the Battery-LED Board".
