Prerequisites
Remove the battery.
Remove the keyboard.
Remove the base cover.
Remove the Optical Drive.
Remove the palm rest.
Removing the Display Assembly:
Close the display and turn the computer over.
Disconnect the antenna cables from the connectors on the Mini-Card.
Make a note of the antenna cables routing and remove the cables from the routing guides.
Turn the computer over and open the display as far as possible.
Pull the antenna cables up through the slot on the computer base.
Pull the pull-tab to disconnect the display cable from the system-board connector.
Make a note of the display cable routing and remove the cable from the routing guides.
Remove the screws that secure the display assembly to the computer base.
Lift the display assembly off the computer base.