How to Replace Air Shroud for PowerEdge R760xa

Follow safety guidelines, power off, and remove the system cover. Learn to remove and reinstall the air shroud efficiently.

Prerequisites
Follow the safety guidelines listed in the Safety instructions.
Power off the system and all attached peripherals.
Disconnect the system from the electrical outlet and disconnect the peripherals.
If applicable, remove the system from the rack.
Remove the system cover.



Removing the air shroud:
Press the latch on the air shroud.
NOTE:To remove left air shroud, press the latch on right air shroud the opposite way.
Hold the edges of the air shroud, and lift the air shroud out of the system.


Installing the air shroud:
Align the slot on the air shroud with the tab on the left or right air shroud.
Lower the air shroud into the system until it is firmly seated.