How to Replace Single AMD MI355X_AC GPU and heatsink in XE9785

Learn how to replace Single AMD MI355X GPU and heatsink in XE9785. This video explains the replacement procedure for Single AMD MI355X GPU and heatsink in XE9785.

In this video, we show how to replace a MI355x GPU and heatsink module in a PowerEdge XE9785. Before working inside your system, read through and follow safety guidelines to protect your system from potential damage and ensure your personal safety.

For more information about safety guidelines, see the Service Manual at: dell.com/support Before you begin, remove the GPU fans, the GPU fan cage, slide out or remove the GPU sled and remove the cover. To remove the GPU and heatsink module, loosen the screws in numerical order, starting with one. And two. Three. And four.

With the screws loosened, use the handle to lift the GPU and heatsink straight up and out of the system. when installing a GPU and heatsink module, make sure to use a torque driver to tighten the screws to 1.5 Newton meters or 13.5ft pounds per inch.

To install a GPU and heatsink assembly, align and lower it into the system until fully seated. Then tighten the screws in reverse numerical order, starting with four. Three. Two. And one. For more information or support about the PowerEdge XE9785, visit dell.com/support.