This tutorial provides step-by-step instructions on how to remove and install the memory module on a Dell Pro Max 14 MC14250. Before you begin, power off your computer and disconnect all attached peripherals. Always wear ESD wrist strap while working inside the computer to prevent damage due to electrostatic discharge. If you need more information about Dell Pro Max 14 MC14250, visit: Dell.com/Support.
In this video, we will demonstrate how to replace the memory module on your computer. Ensure that you always use ESD protection when working inside the computer. Disconnect all the attached peripherals.
To enter service mode, press and hold the B key on the keyboard and then press the power button. Now the computer will boot up and the owner tag information is displayed on the screen. Press any key to proceed. The computer will emit three short beeps and shut down.
To begin, loosen the eight captive screws that secure the base cover to the palm-rest assembly. Next, use a plastic scribe to pry open the base cover, starting from the recesses near the hinges. Continue prying along the other sides to release the base cover and remove it.
Now locate the memory module. In sequential order, remove the three screws that secure the memory module bracket to the system board. Then, lift the bracket away from the system board. Carefully lift the memory module away from the memory-module connector.
To install the memory module. First align and place it on the memory module connector plate. Then, align and place the memory-module bracket on the module. In sequential order, replace the three screws to secure the bracket to the system board. Align the base cover with the palm-rest assembly and snap the cover into place. Tighten the eight captive screws to secure the base cover to the palm-rest assembly.
Once the computer is fully assembled, Once the computer is fully assembled, connect the power adapter. Press the power button to turn on the computer and exit service mode. Please note the computer will only power on if the power adapter is connected. Please note the computer will only power on if the power adapter is connected. For more information or support about your computer, visit: Dell.com/Support.
