Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety For more information about safety guidelines, see the owner’s manual at: Dell.com/Support. Before you begin, turn off the computer and disconnect all the attached peripherals.
To remove the solid-state drive twenty-two thirty, loosen the four screws on the sides of the base cover. Remove the two screws at the rear of the base cover and pry the cover off the system to remove it. Find and unplug the battery cable. Identify the solid-state drive and remove the screw. Unlatch and lift the drive out of the system.
To reinstall the solid-state drive twenty-two thirty, place it back in the system. Re-latch and tighten the screw to secure the drive. Plug in the battery cable. Place the base cover back on the system and secure it with the six total screws. For more information about your Dell system, visit: Dell.com/Support.
