Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety. For more information about safety guidelines, see the Owner’s manual at: Dell.com/Support. Before you begin, turn off the computer and disconnect all the attached peripherals.
To remove the solid-state drive twenty-two thirty, loosen the two screws at the front of the base cover and remove the six screws securing the cover. Pry the cover off the system to remove it. Find the battery cable and remove the piece of tape. Unplug the cable Identify the solid-state drive and remove the two screws. Unlatch and lift the drive out of the system.
To reinstall the solid-state drive, place it back in the system. re-latch and install the two screws to secure the drive. Reconnect the battery cable and reattach the piece of tape. Place the base cover back on the system and secure it with the eight screws. For more information about your Dell system, visit: Dell.com/Support.
