How to Replace the SSD 2280 on OptiPlex 3090 Tower

This video will demonstrate the removal and reinstallation procedure of an SSD 2280 for OptiPlex 3090 Tower.

To remove the solid state drive 2280, loosen the two screws securing the side cover. Lift the cover off the system, find and unlatch the fan duct to remove it from the system. Identify the solid state drive and remove the screw securing it. Lift the drive out of the system.

To reinstall the solid state drive, 2280, place it back in the system and install the screw. Then latch the fan duct into place. Secure the side cover with the two screws.