To remove the solid state drive, unlatch and remove the system's base cover. Then unlatch and remove the front bezel from the system. Identify the hard drive assembly and slide the tab to unlock the latch. Grasp the cables at the connector base and disconnect them. Lift the assembly up to remove it.
Find the solid state drive and remove the screw securing it. Slightly lift and remove the drive from the system. To reinstall the solid state drive, place it back in the system and tighten the screw to secure it. Place the assembly back in the system. Reconnect the cables and relatch the assembly. Place the front bezel and base cover on the device.
