Fazer download dos arquivos
Formato do arquivo: Este formato de arquivo consiste em um arquivo executável do BIOS. O formato Universal (Windows/MS DOS) pode ser usado para instalação de qualquer ambiente Windows ou MS DOS.
Nome do arquivo: Insprion_3452_4.0.1.EXE
Tamanho do arquivo: 5.89 MB
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5: 2ae936d3150b44fd449319d37651d7d4
SHA1: f62d4405697c76ad0c1395d0639f51a2ffb18182
SHA-256: 740c353fb268765c7ad347f542354cb9b8ba2b9b7bea6d2347abf9db67724fb7
Correções e aprimoramentos
Fixes
- Enable DPTF for fanless config.
- Remove ePSA Fan test item for fanless config.
- Modify values by DPTF control table V01.
Enhancements
- Update KBC WISBS15.bin.
Sistemas operacionais compatíveis
Instruções de instalação
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to General > Boot Sequence > Boot List Option
3. Change UEFI to Legacy of Boot List Option
4. Click Apply, Exit to save changes and reboot system.
5. Press F12, then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to General > Boot Sequence > Boot List Option
9. Change Legacy to UEFI Boot Option.
10. Click Apply, Exit to save changes and reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.
Reboot will be required