Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Before updating the BIOS, please suspend BitLocker encryption. If it is not enabled on your system, you can skip this step. Learn more

Dell Dimension System BIOS, A02

SmartStep 150D A02 FlashBIOS

获得最新的驱动程序

请输入您的产品详细信息以查看系统的最新驱动程序信息。

此驱动程序不兼容

此驱动程序是最新的

驱动程序信息是最新的。要查看适用于 的所有驱动程序,请转到“驱动程序和下载”。

补丁和增强功能

The following changes have been made to the A01 BIOS to create A02:

1. Added support for newer Celeron processors.
2. Adjusted USB Emulation support for special keys, and non-US keyboards.
3. Added IDE UDMA support to speed up resume from Hibernate (when enabled).
4. Enhanced USB code to handle some HUBs that are slow in processing port
power.
5. Added support for additional models in the 2200 Series.
6. Fixed issues with some USB devices causing a keyboard POST error with a
USB keyboard.
7. Fixed false error on Floppy Drive when running Diags From Bootable
Diags CD without a Floppy Drive.
8. Fixed possible boot issue when a dormant device is removed from the
device
list.

版本

版本A02、A02

类别

BIOS

发布日期

01 1月 0001

上次更新

03 11月 2011

重要性

可用格式

文件格式: Floppy
文件名: BS150D02.exe
下载类型: HTTP
文件大小: 445 KB
格式说明:
此文件包含一组压缩文件。将文件下载到硬盘上的文件夹中,然后双击它来解压这组文件。请按照说明完成安装。
To ensure the integrity of your download, please verify the checksum value.
MD5:
不提供
SHA1:
不提供
SHA-256:
不提供
文件格式: Non-Packaged
文件名: S150DA02.EXE
下载类型: HTTP
文件大小: 273.09 KB
格式说明:
此文件格式包含BIOS可执行文件。要更新系统,请下载文件并将其保存到桌面或硬盘,然后运行该可执行文件。要更新BIOS,您的系统必须连接交流电源并具有至少10 %的电池电量。
To ensure the integrity of your download, please verify the checksum value.
MD5:
不提供
SHA1:
不提供
SHA-256:
不提供

开始下载软件,即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。

Dimension System BIOS


Default Instructions for S150DA02.EXE:

Non-Packaged
Creating the disk:
NOTE: This procedure requires one blank bootable, formatted 3.5-inch
floppy disk. Label the disk BIOS.

1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Insert the blank bootable formatted 3.5-inch floppy disk.
7. Right-click the copy of the file, point to “Send To”, click “3 1/2
Floppy (a)”, and then skip to the section Flashing the BIOS below.

Flashing the BIOS:
NOTICE: Changing the system BIOS may result in unintended side affects,
such as incompatibility of the new BIOS with installed hardware. If
problems arise after a BIOS change, it may be necessary to return the
system to the original version of the BIOS.
1. If you are flashing the BIOS on a portable computer, be sure that
the AC adapter is plugged in and the computer is not operating on battery
power.
2. Ensure that the Flash BIOS disk is inserted into the floppy disk
drive.
3. Click the “Start” button, click “Shut Down”, click “Restart”, and
then click “Ok”.
The computer should restart and boot to the floppy disk.

NOTE: If the flash BIOS program does not start, and you see only an A:\
prompt, refer to the instructions from the Dell File Library page for the
BIOS update or to the Readme.txt instructions. Generally, you will type
the name of the executable flash BIOS file such as 8100_A09.EXE for BIOS
version A09 on the Dimension™ 8100 series system.

A Press any key to continue prompt appears.
4. Press the “Enter” key.
A Press Y to replace old BIOS with new BIOS prompt appears.
5. Press the “Y” key.

NOTICE: Do not interrupt the system during this process. Please refrain
from pressing any keys on the keyboard, moving the mouse, or interrupting
power to the system. Failure to do so could result in damage to the system
BIOS.

When the computer has finished updating the BIOS, a Flash program
successful. Press any key to reboot prompt appears.
6. Remove the floppy disk and press the “Enter” key.
7. The computer will now restart with the new revision of the BIOS
installed.
The boot screen will indicate the BIOS version.

If you encounter device or resource errors after flashing the system BIOS,
enter the System Setup, clear the NVRAM and restore the system defaults.
For more information, refer to Dell Knowledge Base Articles:
· FA1035262 Title "How do I restore setup defaults on my Dell
Dimension™ system?"
· FA1023538 Title "How do I clear NVRAM on my Dell Dimension system?"




Floppy Disk Boot to Disk for BS150D02.exe

Download

1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Hard Drive Floppy Disk Creation

1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files a

驱动程序帮助和教程