驱动程序详情

警告:更新BIOS时请勿关闭计算机或拔下电源,否则可能会损害您的计算机。在更新过程中,您的计算机将重新启动,并且会出现短暂黑屏。

Dell Inspiron 5577 System BIOS

This package provides the Dell System BIOS update and is supported on Dell Inspiron 5577 System models that are running the following Operating System: Windows and DOS

补丁和增强功能

[Fixes]
-Update Intel ME Firmware to address security advisories INTEL-SA-00125 (CVE-2018-3655) & Intel-SA-00131 (CVE-2018-3643 CVE-2018-3644)

版本

版本1.1.1、1.1.1

类别

BIOS

发布日期

12 九月 2018

上次更新

12 九月 2018

重要性

可用格式

文件格式:Windows/DOS
文件名:5577111.EXE
下载类型:HTTP
文件大小: 6 MB
格式说明:此文件格式包含BIOS可执行文件。可以使用通用格式(Windows/MS DOS),从任何Windows或MS DOS环境安装。
为确保完整下载,请验证校验和值。
MD5:
02655e28c383073fb94256317329dc15
SHA1:
d90db9d30b14e9c4ab890bd667017edf6b75851c
SHA-256:
771d73948644574c6cae15333d32d1ab18b1f9d66d4c1bdc8b24be47c77d350a

开始下载软件,即表示您接受戴尔软件许可协议 ( 英文版 ) 条款。

版本
1.1.3,1.1.3 09 七月 20192:27:03
1.1.2,1.1.2 20 三月 20197:18:53
1.1.0,1.1.0 10 七月 20182:25:16
1.0.9,1.0.9 18 二月 201819:32:39
1.0.7,1.0.7 30 十一月 20173:19:56
1.0.6,1.0.6 08 十一月 20175:40:36
1.0.5,1.0.5 21 八月 20173:13:52
1.0.4,1.0.4 28 六月 20177:52:41
1.0.1,1.0.1 25 四月 20173:41:28
受支持的操作系统
BIOS
您是否在寻找其他操作系统?查看戴尔支持的操作系统列表
适用于
Dell Inspiron 5577
安装说明
BIOS Update Executable for Windows/DOS

Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.

--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
x
警告:更新BIOS时请勿关闭计算机或拔下电源,否则可能会损害您的计算机。在更新过程中,您的计算机将重新启动,并且会出现短暂黑屏。

此驱动程序已在您的设备支持的操作系统、显卡和应用程序上通过了独立软件供应商(ISV)和戴尔的测试,以确保最高的兼容性和性能。 详情

戴尔强烈建议尽快应用此更新。此更新包含的更改可提高您的戴尔系统的可靠性和可用性。