Mellanox Windows 64-bit Server Operating System drivers for Mellanox ConnectX-4 Lx and ConnectX-4 Ethernet adapters.
ΕγκαταστάθηκεΑυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
This package provides the Windows 64-bit drivers for Mellanox ConnectX-4 Lx and ConnectX-4 Ethernet Adapters and is supported on Dell EMC PowerEdge servers with the following operating systems: Windows Server 2012 , Windows Server 2012 R2 and Windows Server 2016
Συνιστάται
Έλεγχος συμβατότητας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σας
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος.Δείξτε μου πώς
Δεν προέκυψαν αποτελέσματα.Δεν μπορέσαμε να βρούμε τίποτα για την αναζήτησή σας. Τροποποιήστε την αναζήτησή σας για να εισαγάγετε μια ετικέτα εξυπηρέτησης (B959FS3) ή ένα μοντέλο (Latitude 5540) και δοκιμάστε ξανά.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση.Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
Fixes: ------- - Fixed an issue that could cause a crash when the PF miniport driver did not wait for all previously indicated receive packets to return to the miniport from the VPort. - Fixed an issue where the ND provider threw an exception when an invalid parameter was used. - Fixed an issue where RSS counters were incorrectly incremented for encapsulated traffic. - Fixed an issue in the getConnectionData method, where the pcbPrivateData did not return the correct value in case the pPrivateData buffer value was lower than required. - Fixed an issue that caused an installation failure when running in modify mode with the ADDLOCAL=All parameter. - Removed an incorrect event log message in VMQ NIC switch mode. - Fixed an high stress issue that caused uncontrolled memory consumption, sporadic miniport device resets and missing send completion. - Fixed an issue where the shortcut to the system snapshot tool was broken and pointed to the wrong folder. - Moved SR-IOV VF's live migration from Beta level to full support of all flows - Removed a limitation that did not allow both of the following Ethertypes to be enabled at the same time: 0x8906 - Fibre Channel over Ethernet (FCoE) 0x8914 - FCoE Initialization Protocol - Updated the Cnp_dscp changeable values to 0-63, as supported by the firmware
Enhancements: ----------------- - Diagnostics - Added 3 diagnostic counters: Send queues priority counter, Current queues under processor handle counter, Total queues under processor handle counter. - RDMA - Added the host ability to control RDMA per VM when using Windows Server. The host can turn RDMA on or off for a specific VM without affecting other VMs. - RDMA - Added NDK (Network Direct Kernel) v3 support. - RDMA - Enabled by default RDMA in the VF from the host, using the EnableguestRdma registry key. - Performance - Removed the RssMaxProcNumber registry key from the registry, and the "RSS Maximum Processor Number" from the UI. - Installation - Added the ability to upgrade the driver while ND application is running.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Download 1. Click Download Now to download the file, Network_Driver_TNN0X_WN64_01.80.04.EXE 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Χρειάζεστε βοήθεια με προβλήματα σύνδεσης δικτύου;
Βρείτε μια λύση στον οδηγό αντιμετώπισης προβλημάτων δικτύου της Dell