Dell Precision 7510/7710 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : 7J0H0

Importance : Critical

Version : 1.15.4, 1.15.4 Latest version Recommended version Latest and Recommended version

Release Date : 06 Feb 2018

Download Type : System BIOS

Category : BIOS

This package provides the Dell System BIOS update and is supported on Dell Precision 7510/7710 for Windows and DOS Operating Systems.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Precision_7x10_1.15.4.exe

File size: 9.51 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 4030b126d8338d77635829486e791750

SHA1: 71923e005dcdeb44a55f6e4307e70099d39c350e

SHA-256: 811cf52e275c5f11f0316a6de0b9429f379dced7dd32436668a26756fccd90a9

Download .EXE

File Format: This file format contains plain text which can be viewed with a standard text editor.

File Name: Precision_7x10_1.15.4.txt

File size: 13.22 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: 84c785ff802c6b541ff2ebe26d7fc795

SHA1: 5c0af199f0a7e0da13a3b1cc4d6069ef92eabde2

SHA-256: c5ee7766132187c0bd60b3721b9b05bacf3dc6af11713af2bc85497773eb4e1e

Download .TXT

Fixes & Enhancements

Fixes:
- Fixed system hang when notebook lid closed with Dell Thunderbolt Dock attached and Dell PBA (DDPE application) encrypted.
- Fixed system hang when unplug/plug WD15 dock in BIOS setup.
- Fixed specific System hangs up when set power scheme but turn off the LCD panel after 10 min.
- Update to the latest CPU microcode to address CVE-2017-5715.
- Updated Intel ME Firmware to address security advisories INTEL-SA-00086 (CVE-2017-5705, CVE-2017-5708, CVE-2017-5711 & CVE-2017-5712) & INTEL-SA-00101(CVE-2017-13077, CVE-2017-13078 & CVE-2017-13080).
- Updated the handling of pre-boot authentication information by firmware.
- Updated UEFI variable input validation.
- Updated the handling of 3rd party Option ROM loading.
- Updated SPI flash command configuration settings.

Enhancements:
- Not Applicable.

Installation instructions

BIOS Update Executable for Windows/DOS

Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.

Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.

Dell Precision 7510/7710 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to