Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Embedded_Box_PC_5000_1.4.2.exe
File size: 8.73 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 53053807e164076367b91d739d22c26e
SHA1: d6ff6d66cc0bbb0ef668995a866d8ae6bf27fef6
SHA-256: b9aa359590a66c50c08b3efed2d02f9f040a4192c22a215db06394fedb2a9578
Fixes & Enhancements
Fixes:
- Updated the handling of pre-boot authentication information by firmware
- Updated UEFI variable input validation
- Updated the handling of 3rd party Option ROM loading
- Updated SPI flash command configuration settings
- Updated Intel ME Firmware to address security advisory INTEL-SA-00086 (CVE-2017-5705 & CVE-2017-5708)
- Update to the latest CPU microcode to address CVE-2017-5715
- Fixed Microsoft PBA (BitLocker) recovery key screen prompt issue when TPM Validation Profile PCR2 enabled
Enhancements:
- Support new WWAN card
Supported Operating Systems
Installation instructions
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
Applies to
Dell Embedded Box PC 5000 System BIOS