Dell EMC Networking N1500 Series, Firmware Version 6.6.2.5
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Dell EMC Networking N1500 Series Firmware version 6.6.2.5
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: FIELD-DNSE CS00010819758 [All except N11xx/N15xx] Removal of Loopback interface support causing config migration failure after upgrading to 6.6.2 FIELD-5179 CS00010565731 Unable to configure IP addresses, logs indicate Max routes reached FIELD-5192 CS00010599599 Switch with MLAG, warning messages "MAC moving for entry type 9 to type 1" FIELD-5273 & 5286 CS00010688644 Insert/Deletes/Drops Logs are occurring frequently and intermittent phones resets FIELD-5367 & 5368 CS00010799189 [N20xx/N30xx] Switches are bricked after rebooting post CPLD update with 6.6.2.0 code FIELD-5370 CS00010804313 [N30xx/N31xx]Switch in boot loop after upgrading from 6.5.2.35 to 6.6.2.30 FIELD-5378 CS00010808504 [All PoE Platforms] Some CISCO Phones can't power up when switch is upgraded to 6.6.2.30
Enhancements: -Added support for N1108EP-ON -G.8032 Ethernet_Ring_Protection support for N1500 -VLAN Port Security, port MAC locking to limit the MAC addresses learned on a particular VLAN -Establish an outbound connection to a remote SSH server from the switch console
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Fixes: FIELD-DNSE CS00010819758 [All except N11xx/N15xx] Removal of Loopback interface support causing config migration failure after upgrading to 6.6.2 FIELD-5179 CS00010565731 Unable to configure IP addresses, logs indicate Max routes reached FIELD-5192 CS00010599599 Switch with MLAG, warning messages "MAC moving for entry type 9 to type 1" FIELD-5273 & 5286 CS00010688644 Insert/Deletes/Drops Logs are occurring frequently and intermittent phones resets FIELD-5367 & 5368 CS00010799189 [N20xx/N30xx] Switches are bricked after rebooting post CPLD update with 6.6.2.0 code FIELD-5370 CS00010804313 [N30xx/N31xx]Switch in boot loop after upgrading from 6.5.2.35 to 6.6.2.30 FIELD-5378 CS00010808504 [All PoE Platforms] Some CISCO Phones can't power up when switch is upgraded to 6.6.2.30
Enhancements: -Added support for N1108EP-ON -G.8032 Ethernet_Ring_Protection support for N1500 -VLAN Port Security, port MAC locking to limit the MAC addresses learned on a particular VLAN -Establish an outbound connection to a remote SSH server from the switch console
(1) Download the zip file - N1500v6.6.2.5 (2) Extract the image file "N1500v6.6.2.5.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N1500 Series Switches From version 6.x.x.x to 6.6.2.5.pdf" extracted from zip file.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.