Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: O390-A14.exe
File size: 2.79 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 176af6bea851865c5927b69ff45064ab
SHA1: e79ca19e45b78e90a871b206d7938329fac5b9b4
SHA-256: 5d7c70224ac6732950c502e0e77dfca09225b249ebf7a1745a4c83c2935a8349
Fixes & Enhancements
- Update to the latest CPU microcode to address CVE-2017-5715.
- Update CPU microcode to address Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 and CVE-2018-3640).
Important Information
- If the BIOS version A01 or any earlier version is currently installed on your system, you must first update the BIOS to version A02 before installing the latest update.
- To download A02 version, go to http://www.dell.com/support/home/us/en/04/drivers/DriversDetails?productCode=optiplex-390&driverId=1CR51
Supported Operating Systems
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ OptiPlex_390 _X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and OptiPlex_390 _X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.