Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 7537A13.exe
File size: 10.28 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 464bf252021b1206bd881e0edec53e15
SHA1: b8fae6bca7d828fcb7ad278b96d916d760a09826
SHA-256: c5c44ea80af23301dde0f81a70da5edf4f0dd1c8e8fc0be42cd2758733c17242
Fixes & Enhancements
Fixes
- Fixed Boot option sometimes will crash after set it by bcdedit.
- Fixed ISCT option disappeared once set to disable.
Enhancements
- Enable SCT LockBox feature to Intel security.
- Enhanced the stability of the workaround for touch panel reset : Side effect of XHCI HUB solution.
- Enhanced the stability of XHCI controller when attached Dell Monitor MSK14 and restart system.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears,click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment,if Legacy Boot mode
1.Copy the downloaded file to a bootable DOS USB key.
2.Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3.Run the file by typing copied file name where the executable is located.
4.DOS System will auto restart and update BIOS while system startup screen.
5.After BIOS update finished,system will auto reboot to take effect.
Run the BIOS update utility from DOS environment,if UEFI Boot mode with Load Legacy Option disabled
1.Copy the downloaded file to a bootable DOS USB key.
2.Power on the system, then go to BIOS Setup by pressing F2 and go to Boot_Boot List Option.
3.Change UEFI to Legacy of Boot List Option.
4.Go to Exit_Exit Save Changes and reboot system.
5.Press F12,then Select USB Storage Device and Boot to DOS prompt.
6.Run the file by typing copied file name where the executable is located.
7.DOS System will auto restart and update BIOS while system startup screen.
8.After BIOS update finished,system will auto reboot.
9.Go to BIOS Setup by pressing pressing F2 and go to Boot_Boot List Option.
10.Change Legacy to UEFI Boot Option.
11.Go to Exit_Exit Save Changes and reboot system
--------------------------------------------------------------------------------
Note 1:You will need to provide a bootable DOS USB key.This executable file does not create the DOS system files.
Note 2:Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required