Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Precision 7510/7710 System BIOS
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This package provides the Dell System BIOS update and is supported on Dell Precision 7510/7710 for Windows and DOS Operating Systems.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search to enter a service tag (B959FS3) or model (Latitude 5540) and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: - Fixed system restart issue when both Device Guard and Credential Guard enabled in Win10 enterprise. - Fixed system only can switch display to external monitor one time by lid close in the Bios Setup. - Fixed system become reboot from hibernation resume after loading Bios default.
Enhancements: - Updated Intel Management Engine Firmware. - Updated Embedded Controller Engine Firmware. - Updated TI Power Delivery firmware. - Updated Intel Video BIOS and Graphics Output Protocol driver. - Updated Intel Rapid Storage Technology RAID Driver.
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
Download 1. Click Download File to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation Run the BIOS update utility from Windows environment 1. Browse to the location where you downloaded the file and double-click the new file. 2. Windows System will auto restart and update BIOS while system startup screen. 3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt. 3. Run the file by typing copied file name where the executable is located. 4. DOS System will auto restart and update BIOS while system startup screen. 5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option". 3. Change "UEFI" to "Legacy" of Boot List Option. 4. Click "Apply","Exit" to save changes and reboot system. 5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt. 6. Run the file by typing copied file name where the executable is located. 7. DOS system will auto restart and update BIOS while system startup screen. 8. After BIOS update finished, system will auto reboot. 9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option". 10. Change "Legacy" to "UEFI" Boot Option. 11. Go to "Exit > Exit Save Changes" and reboot system.
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files. Note 2: Please make sure you suspend BitLockerencryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.
Reboot will be required
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.