Dell Server PowerEdge R750, R750xa, R750xs, R650, R650xs, R550, R450, C6520, MX750c and T550 BIOS Version 1.18.1

- It's expected behavior for UEFI0074 to be recorded in Lifecycle log or observed during the initial BIOS POST when upgrading/downgrading BIOS from v1.14.1 (or older) to v1.15.1 (or newer).

- Please make sure the BIOS has been updated to 1.7.4 (or newer revision) before you update the iDRAC firmware to Rev. 6.00.30.00 (or newer revision) to avoid an issue, the system would halt at an early boot during BIOS-iDRAC handshake while displaying the message "initializing data processing unit". This issue may occur after AC power cycle or while updating a CPLD firmware.

- After the implementation of a security enhancement, BIOS version 1.9.2 made the SGX sealed data inaccessible, preventing access by older BIOS. As a result, it is not advisable to downgrade the BIOS on an Intel SGX-enabled system to a previous version. Intel Software Guard Extensions Data Center Attestation Primitives (Intel SGX DCAP) and Intel Software Guard Extensions Provisioning Certification Service (Intel SGX PCS) users must update their BIOS to version 1.9.2 or newer if they plan to verify collateral with the Intel IAS-LIV enforcement server after January 17, 2023.

- Disabling the CPU Physical Address Limit option from the BIOS setup menu enables 5-level paging. However, enabling the CPU Physical Address Limit option may cause the operating system to stop at the driver verifier DMA violation test with a blue screen error when booting from an operating system that does not support 5-level paging, such as Microsoft Windows Server 2019, Microsoft Windows Server 2016 and so on.

- When updating the BIOS for the first time from version 1.4.4 or earlier versions to a later version, the Correctable Error Logging (CEL) option is Disabled by default.

Dell Update Package Instructions for DRMK
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
-------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.

You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign