Samsung PM1653 drives for DSG8 FW for model numbers MZILG960HCHQAD3, MZILG1T9HCJRAD3, MZILG3T8HCLSAD3, MZILG7T6HBLAAD3 and MZILG15THBLAAD3
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.To fully enable the DSG8 firmware a power cycle of the drive is required after update.
This release contains firmware version DSG8 for Samsung drives. Vendor model numbers MZILG960HCHQAD3, MZILG1T9HCJRAD3, MZILG3T8HCLSAD3, MZILG7T6HBLAAD3 and MZILG15THBLAAD3.
This release contains firmware version DSG8 for Samsung drives. Vendor model numbers MZILG960HCHQAD3, MZILG1T9HCJRAD3, MZILG3T8HCLSAD3, MZILG7T6HBLAAD3 and MZILG15THBLAAD3.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
SAS4 Signal Integrity improvements for 16G
2 Fixes for 04/29/04 FW assert conditions on Power On Reset and IT Nexus loss testing
2 Fixes for FW asserts that occurred during reset testing
2 Fixes for FW assert conditions during Write same testing with Aborts injected
Resolved a timeout condition during link down error injection testing
Resolved low likelihood cases where false Unrecovered Errors could occur on NAND reads
Resolved an issue where Background Extended Drive Self test could exceed the 30 minute spec limit
Read More2 Fixes for 04/29/04 FW assert conditions on Power On Reset and IT Nexus loss testing
2 Fixes for FW asserts that occurred during reset testing
2 Fixes for FW assert conditions during Write same testing with Aborts injected
Resolved a timeout condition during link down error injection testing
Resolved low likelihood cases where false Unrecovered Errors could occur on NAND reads
Resolved an issue where Background Extended Drive Self test could exceed the 30 minute spec limit
Version
DSG8, A00
Release date
10 Apr 2023
Download Type
Firmware
Category
SAS Drive
Importance
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: SAS-Drive_Firmware_FMKMG_WN64_DSG8_A00_03.EXE
File Size: 23.39 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
3fb3a617b669706cc91920e9854ebbe1
SHA1:
97f5a16b46ee525d66a7bf19fad1b840097edb74
SHA-256:
67cae418aabae485374809ebf6f535d9dec9602a9325bfae8337a3aaeb282580
File Format: A GnuPG file which contains a cryptographic signature
File Name: SAS-Drive_Firmware_FMKMG_LN64_DSG8_A00_03.BIN.sign
File Size: 842 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
b8041bde1904c18c6a9258d98a410a92
SHA1:
785213e53a7e7758cd7d970af18f37d1481b0052
SHA-256:
ff8fc6fd641a8cb1b40161334e8c9d22538f95be4069566ab5881bf13ecfc7e4
File Format: Update Package for Red Hat Linux
File Name: SAS-Drive_Firmware_FMKMG_LN64_DSG8_A00_03.BIN
File Size: 9.85 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
10867b6e518d9893a2e5fbbb66d69aab
SHA1:
21665d432f398fb66a9bd3ca4b34705f6b5f30a6
SHA-256:
4e4fcfae1426215bee82407efde279cbf5c311a56b12d00cbeb3ff68f3e25dbb
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
To fully enable the DSG8 firmware a power cycle of the drive is required after update.
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in an Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in an Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Supported Operating Systems
Novell SuSE Linux ES 11
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Linux
Not Applicable
Novell SuSE Linux ES 10
SuSE Linux Desktop 11
SUSE Linux ES 12
SuSE Linux ES 15
Applies to
EC Samsung PM1653 1WPD, 24Gbps SAS, SSD, 2.5, 512e, ISE
Model Number: MZILG15THBLAAD3
Regulatory Model Number: MZILG15TH
Vendor PN: MZILG15THBLA-00AD3
EC Samsung PM1653 1WPD, 24Gbps SAS, SSD, 2.5, 512e, ISE
Model Number: MZILG1T9HCJRAD3
Regulatory Model Number: MZILG1T9H
Vendor PN: MZILG1T9HCJR-00AD3
EC Samsung PM1653 1WPD, 24Gbps SAS, SSD, 2.5, 512e, ISE
Model Number: MZILG3T8HCLSAD3
Regulatory Model Number: MZILG3T8H
Vendor PN: MZILG3T8HCLS-00AD3
EC Samsung PM1653 1WPD, 24Gbps SAS, SSD, 2.5, 512e, ISE
Model Number: MZILG7T6HBLAAD3
Regulatory Model Number: MZILG7T6H
Vendor PN: MZILG7T6HBLA-00AD3
EC Samsung PM1653 1WPD, 24Gbps SAS, SSD, 2.5, 512e, ISE
Model Number: MZILG960HCHQAD3
Regulatory Model Number: MZILG960H
Vendor PN: MZILG960HCHQ-00AD3
Installation instructions
Dell Update Package instrucvtions for Windows Dup:
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware__LN__A00.BIN " from the shell.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware__LN__A00.BIN.sign.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware_
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware_
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.