Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Server PowerEdge BIOS R840/R940xa Version 2.24.0
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.For more information about specific items added and resolved in this BIOS version, see the Fixes and New and enhanced features sections. If there's any security fix included in this BIOS, we'll address it in the BIOS external release note.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Resolved an issue with UEFI iSCSI Boot where the absence of a "NOP in" response was causing disconnects and boot failures from the SAN.
Enhancements:
- Updated the following:
* Processor and Memory Reference Code for the second-generation Intel Xeon Processor Scalable Family to IPU 2025.2.
* Processor Microcode to version 0x3901 for the second-generation Intel Xeon Processor Scalable Family.
* Correct UEFI0305 message as below, which should be "disable" TXT if unable update BIOS.
+ Unable to update BIOS firmware in the previous boot. (Reason: System is in TXT boot environment. To flash the BIOS, disable TXT in BIOS setup and reboot the system.).
- This product release contains security update DSA-2025-156. Any security fix information will be accessible on the Dell Security Advisories and Notices website.
Read More- Resolved an issue with UEFI iSCSI Boot where the absence of a "NOP in" response was causing disconnects and boot failures from the SAN.
Enhancements:
- Updated the following:
* Processor and Memory Reference Code for the second-generation Intel Xeon Processor Scalable Family to IPU 2025.2.
* Processor Microcode to version 0x3901 for the second-generation Intel Xeon Processor Scalable Family.
* Correct UEFI0305 message as below, which should be "disable" TXT if unable update BIOS.
+ Unable to update BIOS firmware in the previous boot. (Reason: System is in TXT boot environment. To flash the BIOS, disable TXT in BIOS setup and reboot the system.).
- This product release contains security update DSA-2025-156. Any security fix information will be accessible on the Dell Security Advisories and Notices website.
Version
2.24.0, 2.24.0
Release date
13 May 2025
Download Type
System BIOS
Category
BIOS
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: BIOS_NW297_WN64_2.24.0.EXE
File Size: 39.87 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
43e66257a7a8c772fae4e62ea559405a
SHA1:
aec14718247ba7d49d93c6d26903545414b399d0
SHA-256:
5afd2eb467a982871199c4013aa74c585f2791f8ece044302358f72dfd1d4f22
File Format: A GnuPG file which contains a cryptographic signature
File Name: BIOS_NW297_LN64_2.24.0.BIN.sign
File Size: 842 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
8100ce8f90ddcb0f910a3efee01edfb9
SHA1:
5c9748795fdbba75e0876072836a3b5ee3fc7923
SHA-256:
44ed86439baf96b1eb8b895494c56d145b1a1c7c6b9df1a7246ea7de9175941f
File Format: A self-extracting file for use in 64-bit machines
File Name: R840-022400.efi
File Size: 19.64 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains compressed content that can be executed from the EFI Shell or EFI Boot Manager. Download the file to the EFI partition on a removable media device. Insert the removable media, then reboot the system and run the program from the EFI Shell or EFI Boot Manager.
To ensure the integrity of your download, please verify the checksum value.
MD5:
1c564897ae3d24d6e0bb61206b65c962
SHA1:
21a210ddde534df5a0d8c7a60aadd3dba59a077b
SHA-256:
3084afb5f451cc9337320d75948d8fc323a0e247d4e1098d3548163198ef558d
File Format: An archive of PDF files to provide help and procedural information to the customers
File Name: R840_R940xa_BIOS.2.24.0_RN.pdf
File Size: 257.11 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
To ensure the integrity of your download, please verify the checksum value.
MD5:
d5fea35eec27690a81b014e88ebd40c0
SHA1:
b07cdb8226c25a1f556873437d3c582e5de94e7b
SHA-256:
f05bbe08292425591c3747189e7f170dbe032580c99b04fb622beb94db7da160
File Format: Update Package for Red Hat Linux
File Name: BIOS_NW297_LN64_2.24.0.BIN
File Size: 29.37 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
158f6a669bcd700d33d970259e6fae40
SHA1:
fcf35fbe2e51522ff5cc0f5a8dba0e3737f30758
SHA-256:
cc9d518c6892e430f206a063dbc455883b7d32d3a5052fdaa17d5ca71268e090
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
- Due to a sighting, Dell has demoted BIOS 2.22.0 for PowerEdge R740, R740xd, R640, and R940, and Precision 7920 Rack Workstation.
- Rolling back to a previous BIOS from 2.14.2 will cause a TXT trusted boot failure with TXT enabled. Since the Intel ACM's SVN (Security Version Number) was increased in BIOS 2.14.2 to address the Security Vulnerabilities CVE-2021-0559, CVE-2021-33123, CVE-2021-33124. The purpose of incrementing the SVN is to prevent executing an older ACM with the vulnerabilities.
* The INTEL ACM's SVN was also increased in the BIOS 2.9.4 since the 1st BIOS revision of this platform as well.
- When using an Update Package (DUP) file or the UEFI Shell command (an EFI file) to update the BIOS version, the process takes longer duration. To resolve this issue, do one of the following:
* Update the BIOS version using an Out-of-Band (OoB) tool such as iDRAC--use GUI or run the RACADM command. See the iDRAC User's Guide or RACADM CLI Reference Guide available on the support site.
* Reduce the system memory capacity by physically removing the memory modules and perform the BIOS update and retry the operation.
- When one or more PCIe devices are installed on the system and if the cards require more of limited legacy I/O resources, the system might modify the I/O resources causing it to restart automatically. The UEFI0256 error message is logged, and the system does not allocate the PCIe resources required. To resolve this issue, do one of the following:
* Remove the PCIe cards from the system that are not used to free up the legacy I/O allocation and provide more I/O allocation space.
* From the System Setup menu, disable to PCIe cards that are not used to free up the legacy I/O allocation.
- When one or more PCIe devices are installed on the system and if the cards require more of Memory-Mapped I/O (MMIO) resources, the system might modify the MMIO resources causing it to restart automatically. The UEFI0256 error message is logged, and the system does not allocate the required PCIe resources required. To resolve this issue, do one of the following:
* Remove the PCIe cards from the system that are not used to free up the MMIO allocation.
* From the System Setup menu, enable the Memory Mapped I/O above 4GB option to free up the MMIO allocation.
NOTE: Before working inside your system, follow the safety guidelines listed in the Safety Instructions topic in the Installation and Services Manual of your respective server model available on the support site.
- Rolling back to a previous BIOS from 2.14.2 will cause a TXT trusted boot failure with TXT enabled. Since the Intel ACM's SVN (Security Version Number) was increased in BIOS 2.14.2 to address the Security Vulnerabilities CVE-2021-0559, CVE-2021-33123, CVE-2021-33124. The purpose of incrementing the SVN is to prevent executing an older ACM with the vulnerabilities.
* The INTEL ACM's SVN was also increased in the BIOS 2.9.4 since the 1st BIOS revision of this platform as well.
- When using an Update Package (DUP) file or the UEFI Shell command (an EFI file) to update the BIOS version, the process takes longer duration. To resolve this issue, do one of the following:
* Update the BIOS version using an Out-of-Band (OoB) tool such as iDRAC--use GUI or run the RACADM command. See the iDRAC User's Guide or RACADM CLI Reference Guide available on the support site.
* Reduce the system memory capacity by physically removing the memory modules and perform the BIOS update and retry the operation.
- When one or more PCIe devices are installed on the system and if the cards require more of limited legacy I/O resources, the system might modify the I/O resources causing it to restart automatically. The UEFI0256 error message is logged, and the system does not allocate the PCIe resources required. To resolve this issue, do one of the following:
* Remove the PCIe cards from the system that are not used to free up the legacy I/O allocation and provide more I/O allocation space.
* From the System Setup menu, disable to PCIe cards that are not used to free up the legacy I/O allocation.
- When one or more PCIe devices are installed on the system and if the cards require more of Memory-Mapped I/O (MMIO) resources, the system might modify the MMIO resources causing it to restart automatically. The UEFI0256 error message is logged, and the system does not allocate the required PCIe resources required. To resolve this issue, do one of the following:
* Remove the PCIe cards from the system that are not used to free up the MMIO allocation.
* From the System Setup menu, enable the Memory Mapped I/O above 4GB option to free up the MMIO allocation.
NOTE: Before working inside your system, follow the safety guidelines listed in the Safety Instructions topic in the Installation and Services Manual of your respective server model available on the support site.
Supported Operating Systems
Not Applicable
Applies to
PowerEdge BIOS
Installation instructions
Dell Update Package Instructions for DRMK
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
-------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
-------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting guideDrivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.