Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell XPS 15 9570 System BIOS
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Technical Advisory INTEL-TA-00473.
To view all drivers for your XPS 15 9570, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
XPS_9570_1.19.0.exe | 17.22 MBEnter the Service Tag of your device to check the compatibility of this download with your device.
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
CPG BIOS Executable for Windows/DOS
File Name:
XPS_9570_1.19.0.exe
File Size:
17.22 MB
Format Description
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
09b5c2956adcf9c85ec7e115fa222020
SHA1:
54d2bd465bc9383bb2e79b0cf061bc2529700947
SHA-256:
500e7df3c60cb3f447d69f72f5b943e5b68d55b9f50726e75b5ff4fa574cdebb
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Fixed the issue where the Administrator and System Password cannot be set through Windows Management Instrumentation (WMI) command. This issue occurs when you enter more than 16 characters.
- Fixed the issue where a user acceptance is prompted to proceed with the BIOSConnect recovery when network stack is disabled in the BIOS.
- Fixed the issue where Enhanced Pre-Boot System Assessment (ePSA) fails to detect disconnected LCD cable issue during the test.
- Firmware updates to address the Intel Technical Advisory INTEL-TA-00473 (CVE-2020-24586, CVE-2020-24587, and CVE-2020-24588).
Enhancements:
- Updated the video controller name in the BIOS to match with the video controller name in the operating system.
Read More
- Fixed the issue where the Administrator and System Password cannot be set through Windows Management Instrumentation (WMI) command. This issue occurs when you enter more than 16 characters.
- Fixed the issue where a user acceptance is prompted to proceed with the BIOSConnect recovery when network stack is disabled in the BIOS.
- Fixed the issue where Enhanced Pre-Boot System Assessment (ePSA) fails to detect disconnected LCD cable issue during the test.
- Firmware updates to address the Intel Technical Advisory INTEL-TA-00473 (CVE-2020-24586, CVE-2020-24587, and CVE-2020-24588).
Enhancements:
- Updated the video controller name in the BIOS to match with the video controller name in the operating system.
Version
1.19.0, 1.19.0
Release date
05 May 2021
Download Type
System BIOS
Category
BIOS
Importance
CriticalDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Important Information
- Once the BIOS is upgraded, you cannot downgrade the BIOS EXE/Recovery (RCV) to versions earlier than 1.4.1 due to restrictions. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Other Available Versions
1.27.012 Sep 2022
1.26.009 Aug 2022
1.25.013 Jun 2022
1.24.025 Apr 2022
1.23.012 Jan 2022
1.22.109 Nov 2021
1.21.029 Sep 2021
1.20.030 Jul 2021
1.18.125 Jan 2021
1.17.119 Aug 2020
1.16.213 May 2020
1.15.014 Jan 2020
1.14.003 Dec 2019
1.13.011 Sep 2019
1.12.022 Jul 2019
1.11.221 Jun 2019
1.10.130 Apr 2019
1.9.123 Apr 2019
1.8.127 Feb 2019
1.7.011 Jan 2019
1.6.003 Dec 2018
1.5.005 Oct 2018
1.4.121 Sep 2018
1.3.117 Aug 2018
1.3.030 Jul 2018
1.2.212 Jul 2018
1.1.413 Jun 2018
1.0.515 May 2018
1.0.004 May 2018
Supported Operating Systems
BIOS
Looking for a different OS? View the list of Dell supported operating systems
Applies to
XPS 15 9570 System BIOS
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.