Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Dell Inspiron 5570 and 5770 KBL System BIOS

Restart required
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices.

Fixes & Enhancements

- Fixed the issue where the hard disk drive (HDD) password gets bypassed after shutting down the system.
Read More

Version

1.0.6, 1.0.6

Release date

10 Nov 2017

Download Type

System BIOS

Category

BIOS

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats

File Format: CPG BIOS Executable for Windows/DOS
File Name: Inspiron5570_5770_106.exe
File Size: 6.55 MB
Format Description:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
368ca9d36c127a340bdf3e408192335c
SHA1:
1b6ab9105bd6398647211bcb078b429724a5922b
SHA-256:
5cfa8f43c333dd28df15115bcf19e406e42cd699bc81d6471895cc23262610dd

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
1.10.010 Aug 2022
1.9.025 Apr 2022
1.8.012 Jan 2022
1.7.009 Nov 2021
1.6.004 Oct 2021
1.5.029 Jul 2021
1.4.109 Feb 2021
1.3.119 Oct 2020
1.2.516 Apr 2020
1.2.324 Jul 2019
1.2.202 May 2019
1.2.114 Mar 2019
1.1.922 Oct 2018
1.1.829 Aug 2018
1.1.602 Jul 2018
1.1.525 May 2018
1.1.321 Feb 2018
1.1.101 Feb 2018
1.0.517 Oct 2017
Dell Inspiron 5570/5770
Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from DOS (Non-Windows users)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.

Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Inspiron_5567_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Inspiron_5567_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes, and reboot the system.

Need help with BIOS issues?

Find a solution in Dell's BIOS troubleshooting and usage guide.

Drivers help and tutorials