Firmware de carte NIC Intel 19.5.0 pour adaptateurs Intel X710, XXV710 et XL710
Redémarrage requisAUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Ce package logiciel contient le package Dell EMC Update permettant d’installer le firmware de carte NIC Intel 19.5.x sur les adaptateurs Intel X710, XXV710 et XL710. Cette version fournit une optimisation continue du code visant à améliorer les performances.
Format de fichier :Package de mise à jour pour Microsoft Windows 64 bits.
Nom du fichier :Network_Firmware_YP4R0_WN64_19.5.12_A00.EXE
Taille du fichier :34.9 MB
Description du format
Les progiciels de mise à jour Dell au format Microsoft Windows 64 bits natif ne nécessitent pas l’installation de Microsoft WOW64 sur Microsoft Windows Server.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
Fixes ===== - Resolved an issue with iPXE that may cause a "page fault exception" fatal error when NIC partitioning (NPAR) is enabled. This may occur during operating system download or during iPXE exit after timeout from the iPXE OS menu. - Resolved an issue on Intel(R) Ethernet X710 10Gb adapters in which the device's LED stays on after blinking when device LED is set to blink mode from F2 Device Settings. - Resolved an issue with Intel(R) X710 based adapters in which the firmware version, Option-ROM and vital product data (VPD) structure are not updated when the firmware is updated on an adapter in firmware recovery mode. - Resolved an issue with Intel(R) Ethernet X710 series adapters in which some physical functions (PF) were unusable because the PF did not initialize correctly when NIC partition (NPAR) was enabled.
Enhancements ===== Added support for two Intel Ethernet 10G 2P X710-T2L adapters
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Format de fichier :Un fichier GnuPG qui contient une signature cryptographique
Nom du fichier :Network_Firmware_YP4R0_LN_19.5.12_A00.BIN.sign
Taille du fichier :226 Bytes
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
La signature GnuPG pour le progiciel de mise à jour Red Hat Linux peut être utilisée pour authentifier l’identité Dell dans le progiciel de mise à jour Red Hat Linux en corrélation.
Format de fichier :Package de mise à jour pour Red Hat Linux
Nom du fichier :Network_Firmware_YP4R0_LN_19.5.12_A00.BIN
Taille du fichier :32.45 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Les progiciels de mise à jour Dell pour Linux peuvent être utilisés comme applications autonomes garantissant que les critères de validation spécifiques sont respectés, appliqués, puis mis à jour. Remarque : les progiciels de mise à jour pour Linux sont de type Open Source. Pour en savoir plus, reportez-vous au fichier Lisez-moi des progiciels de mise à jour Dell pour Linux.
This firmware must be installed by one of the following methods.
- Execution from a Red Hat Enterprise Linux command shell - Execution from a SUSE Linux Enterprise Server command shell - Execution from a supported Windows Operating System - Upload of the EXE file via the iDRAC GUI > Maintenance > System Update interface - Upload of the EXE file via iDRAC using racadm or WSMAN - Upload of the EXE file via the Lifecycle Controller GUI
Once installed, the firmware may interoperate with any operating system for which a compatible driver is present.
==================================== Windows Update Package Installation: ==================================== Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
==================================================== [Alternative] Installation via Lifecycle Controller. ==================================================== 1. Copy the downloaded firmware DUP for Windows to removable USB storage. 2. Insert the removable USB storage in a USB port of the server to be updated. 3. Reboot the server. 4. Press the F10 key to enter Lifecycle Controller. 5. In the left navigation pane, click Firmware Update. 6. In the main pane click Launch Firmware Update. 7. On the Step 1 of 3: Select Update Repository page, select Local Drive. 8. Click the Next button. 9. On the Step 2 of 3: Enter Access Details page, select the removable USB storage from the Local Drive drop-down list. 10. Type the path and filename of the firmware DUP in the File Path or Update Package Path text box. Example: \Network_Firmware_YP4R0_WN64_19.5.12_A00.exe 11. Click the Next button. 12. On the Step 3 of 3: Select Updates page, select the checkbox next to one, or more, of the Available System Updates. 13. Click the Apply button to complete the installation process.
================================== Linux Update Package Installation: ================================== Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Make sure that the network adapter's base driver is loaded in the OS 2. Read over the release information presented by executing the ./Network_Firmware_YP4R0_LN_19.5.12_A00.BIN --version command from the shell. 3. Download and install any prerequisites identified in the above step before proceeding. 4. Run the update by executing ./Network_Firmware_YP4R0_LN_19.5.12_A00.BIN from the shell. 5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for Network_Firmware_YP4R0_LN_19.5.12_A00.BIN:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do this once on your system) 2. Verify the Dell Update Package by using its signature file, Network_Firmware_YP4R0_LN_19.5.12_A00.BIN.sign
Vous avez besoin d’aide pour résoudre des problèmes de connexion réseau ?
Trouvez une solution dans le guide Dell d’utilisation et de dépannage du réseau.