Driver Details

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell Inspiron 5537 System BIOS

This package provides the BIOS update for Dell Inspiron 5537 running the following Operating Systems: Windows and DOS

Fixes & Enhancements

Fixes:
-Not Applicable

Enhancements:
-Disable MrcFastBoot when enter Diagnostic Mode.
-Set RTC data mode to BCD at POST.

Version

Version A08, A08

Category

BIOS

Release date

24 Jun 2014

Last Updated

24 Jun 2014

Importance

Available formats

File Format:Windows/DOS
File Name:5537A08.exe
Download Type:HTTP
File Size: 12 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
fcae996de84daad5a47c4a7d007cf1a4
SHA1:
93992cfe440c7787677042b697b79a5cba11092a
SHA-256:
ff4f914e0c866037750761555e6e8379a67b6aace0c41733f77016ce8f14f14b

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Dell Inspiron 5737/3537/3737/5537 and Vostro 2521
Installation instructions
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
9. Change "Legacy" to "UEFI" Boot Option.
10. Go to "Exit > Exit Save Changes" and reboot system.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).