Dell OpenManage Server Administrator Managed Node (Windows - 32 bit), v8.3

自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。
このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
Dell OpenManage Server Administrator (OMSA) provides a comprehensive, one-to-one systems management solution in two ways: from an integrated,
web browser-based graphical user interface (GUI) and from a command line interface (CLI) through the operating system.
Server Administrator is designed for system administrators to manage systems locally and remotely on a network. It allows system administrators to focus on managing their entire network by providing comprehensive one-to-one systems management.
推奨

お使いのシステムに最適なダウンロードを見つける

製品の詳細をご入力いただき、お使いのシステム用の最新のドライバー情報を表示してください

検索サポート

Dellのサービス タグまたはモデルを入力してください

お使いの製品を検索しますか?製品IDを入力してください。 手順を表示

このドライバーは互換性がありません

このドライバーは、選択した製品には適用されません。別の製品を選択してこのドライバーを使用する製品の詳細を再入力するか、製品サポート ページにアクセスして別の製品のすべてのドライバーを確認してください。

その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。

修正と強化

Fixes:
The following problems are reported in earlier releases of Server Administrator and have been corrected in this release:
- Connection service crash in Windows OS after enabling/disabling session timeout in OMSA.
- PCIeSSD Drives are showing up in the OMSA slots view instead of the Brdige Card.
- NIC and TEAMED NIC association corrected.
- Add attacheement failure fixed on Safari 8.0
- Mellanox card doesnt display all the interface names (ports) in OMSA after we reboot server.
- Omacs crash if new network interfaces appear.
- Broadcom NXII duplicate nic info is showing in OMSA gui after flashing the driver.
- Command log message is not generated for SSL Protocol setting in GUI.
- OMSA reporting Degraded for Unknown Reason status under Hardware Performance.
- OMSA spawning kipmi0 thread even on 12G/13G where IPMI should use interrupts.
- NVMe:Slot occupancy report was displaying single backplane ID and backplane name in GUI and CLI.
- Concatenated option is observed in RAID LEVEL during VD creation in stpe of OMSS.
- OMSS GUI Display improper PD list for successfull RAID to NON RAID conversion on ESXi 5.5.
- After enclosure hot plug fromSAS12Gbps HBA-OMSA showing Enclosure presence.
- OMSA GUI shows BACKPLANE info for T130 server; but T130 is a CABLED HDD config.
- Unassign GHS shows up for PCIe SSD NVMe Disks.
- NVMe PCIeSSD drivers are not sensing in OMSS on RHEL 7.2
- RAID Level Migration from RAID1 to RAID10 without adding any Physical Disks in OMSS GUI with PERC9.2 FW


Enhancements:
The release highlights of Server Administrator are:

1. Support for following server:
- PowerEdge Server R830

2. Support for the following Operating Systems:
- Novell SUSE Linux Enterprise Server 12 Service Pack 1.
- Red hat Enterprise Linux 7.2
NOTE: Citrix XenServer Operating System support has been dropped for Server Administrator and Storage Management.

3. Support for following Web Browser:
- Google Chrome Version 45
- Mozilla Firefox Version 40

4.Support for following features:
- GP-GPU card enablement on C4130
- SNMP Test Trap Button feature on all Linux Operating System.
- Notifying presence of iDRAC on Dell Servers.

5. Added new functionalities inStorage Management:
- Support for 2.5-inch 4KB SATA drivers on PERC 9 family of hardware controllers.
- Support for rear SATA on PowerEdge R730XD connected to software RAID S130 controller.
- Support for PMC SAS Expander on PowerEdge R730.
- Support for Samsung PM1725 NVMe device.
- Support for flexible backplane zoning functionality on backplanes with 24 slots - PowerEdge R630 and PowerEdge R730XD.
- Support for setting Disk Cache Policy at Physical Disk and Virtual Disk level on software RAID S130 controller.
- Support for setting Non-RAID disk cache policy on PERC9 controllers.
- Support for HBA H330 Adapter/Mini Controller.

NOTE: For then list of supported Operating Systems and Dell Servers, see the Dell Systems Software Support Matrix in the required version on OpenManage Software at dell.com/openmanagemanuals.

NOTE: For more information about the features introduced in this release, see the Server Administrator contect-sensitve online help.
詳細を見る

バージョン

8.3, A00

リリース日:

29 3月 2016

ダウンロード タイプ

アプリケーション

カテゴリ

システム管理

重要度

オプション
デル・テクノロジーズでは、このアップデートがお使いのシステムに適用されるかどうか確認することをお勧めします。このアップデートには、特定の構成にのみ影響を与える変更が含まれているか、新機能が含まれています。新機能は、使用している環境に適合する場合もありますが、適合しない場合もあります。
利用可能な形式

ファイル形式: アプリケーション
ファイル名: OM-SrvAdmin-Dell-Web-WIN-8.3.0-1908_A00.exe
ファイルサイズ: 191.18 MB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
フォーマットの説明:
アプリケーション
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
fc26ae7b8e1831a5ddddf476c7b15532
SHA1:
1570b0e95778e1447021ca166f9e80b6c1ee0a13
SHA-256:
fe9e989cd999ea8ba4543fdba5b888f34470a55e95e231294fdf599e7a4a0db8

ダウンロードすることによって、Dellソフトウェア製品ライセンス契約 (英語で) の条項に同意したことになります。

OpenManage Server Administrator Managed Node (Windows - 32bit)
Download
1. Click the Download File link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

NOTE - The file contains the compressed 32-bit Open Manage Server Administrator installer.

Extract Files
1. Browse to the location where the file is downloaded and double-click the new file to unzip the downloaded package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.

Installation
1. Browse to the location where the files are unzipped and run the setup.exe

ドライバのヘルプとチュートリアル