iDRAC with Lifecycle Controller, 3.21.23.22
설치 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
iDRAC with Lifecycle Controller, 3.21.23.22
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Fixes:
iDRAC and LC firmware
- Fixed an issue that was causing iDRAC to lose IP if iDRAC was reset multipe times.
- Fixed an issue that could prevent .local domain names from getting resolved using DNS.
- Fixed an issue that may prevent the host from booting using PXE at the next boot cycle.
- Fixed an issue on DSS 9630 that was preventing Link Status and other properties from being displayed on Network Devices page.
- Fixed an issue which was causing erratic fan speed when Intel X710 NIC/CNA adapters were installed.
- Fixed an issue that was sometimes causing Auto-config to fail.
- Fixed an issue that was sometimes causing PSU firmware update to fail on systems with AMD processors.
- Fixed an issue that was sometimes preventing iDRAC from displaying complete BOSS inventory.
- Fixed an issue that causing iDRAC update to fail when using local RACADM with local share.
- Fixed an issue that causing DNS sever settings to be deleted if VLAN Id was more than 3 digits.
Security
- Fixed WebERP vulnerability.
- CVE-2017-8890
Enhancements :
- Enhanced SEL logs for NVDIMM erase errors.
자세히 보기iDRAC and LC firmware
- Fixed an issue that was causing iDRAC to lose IP if iDRAC was reset multipe times.
- Fixed an issue that could prevent .local domain names from getting resolved using DNS.
- Fixed an issue that may prevent the host from booting using PXE at the next boot cycle.
- Fixed an issue on DSS 9630 that was preventing Link Status and other properties from being displayed on Network Devices page.
- Fixed an issue which was causing erratic fan speed when Intel X710 NIC/CNA adapters were installed.
- Fixed an issue that was sometimes causing Auto-config to fail.
- Fixed an issue that was sometimes causing PSU firmware update to fail on systems with AMD processors.
- Fixed an issue that was sometimes preventing iDRAC from displaying complete BOSS inventory.
- Fixed an issue that causing iDRAC update to fail when using local RACADM with local share.
- Fixed an issue that causing DNS sever settings to be deleted if VLAN Id was more than 3 digits.
Security
- Fixed WebERP vulnerability.
- CVE-2017-8890
Enhancements :
- Enhanced SEL logs for NVDIMM erase errors.
버전
3.21.23.22, A00
출시일
11 9월 2018
다운로드 유형
펌웨어
범주
Lifecycle Controller를 포함하는 iDRAC
중요도
권장Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
파일 형식: MS Windows 64비트용 업데이트 패키지
파일 이름: iDRAC-with-Lifecycle-Controller_Firmware_K877V_WN64_3.21.23.22_A00.EXE
파일 크기: 141.13 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
기본 Microsoft Windows 64비트 형식의 Dell 업데이트 패키지를 사용하기 위해 Microsoft Windows Server에 Microsoft WOW64를 설치할 필요는 없습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
8bbd10f857aec593765270d0a181806b
SHA1:
7ed033ad668603884ee5c0393c5186c40ebac090
SHA-256:
75c994d66a1451561c95ecbc312f577260b33370485d4cc6bf796f5357c17df3
파일 형식: 어플리케이션
파일 이름: iDRAC_3.21.23.22_A00.exe
파일 크기: 128.35 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
어플리케이션
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
87c18f0033b3f3a4c536da0bc44d39c1
SHA1:
bfe1c88850140ebb49b602535d682b22a4bda7ec
SHA-256:
1ea5cd300848f09f9e4d36c3c4dd0e5217ad1af557d20caca13e6d63d331f728
파일 형식: 암호화 서명을 포함하는 GnuPG 파일
파일 이름: iDRAC-with-Lifecycle-Controller_Firmware_K877V_LN_3.21.23.22_A00.BIN.sign
파일 크기: 226 Bytes
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Red Hat Linux용 업데이트 패키지용 GnuPG 서명은 상관관계가 있는 Red Hat Linux 업데이트 패키지에서 Dell의 ID를 인증하는 데 사용할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
adbf740e0d85a3514fe1998c6390f4f7
SHA1:
d584e36cde993e4b66a0452e1ce264b648f6dd53
SHA-256:
7571e78c97b756d706eb193a4ed2a60ecc4f8a73956d6c0db8dfcfd489611708
파일 형식: 고객에게 도움말 및 절차적 정보를 제공하는 PDF 파일의 아카이브
파일 이름: iDRAC_3.21.23.22_ReleaseNotes_A00.pdf
파일 크기: 147.24 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 형식은 고객에게 도움말 및 절차적 정보를 제공하는 데 사용할 PDF 파일의 아카이브로 구성됩니다. 이 아카이브의 파일을 보려면 먼저 Adobe Acrobat Reader를 설치해야 합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
1727a845da83d5879e431b1a40559202
SHA1:
fa090609f171afa17b4f4f087cc5a8ac3b216a78
SHA-256:
86753b50f54cea0569ac5e45c75634a01dd530bdb6ac19716e3b5bc755c4cfab
파일 형식: 외부 릴리스 정보
파일 이름: iDRAC_3.21.23.22_ReleaseNotes_A00.txt
파일 크기: 420 Bytes
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 표준 텍스트 편집기를 사용하여 볼 수 있는 일반 텍스트를 포함합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
bdb1f4b4337bbef689b5fc5544530209
SHA1:
2487686255ec7798d299d76321f47351116ecaf5
SHA-256:
52ac6aac23f973966d65434e63243ca0095af5c046ee16e4c34117a9fc84f371
파일 형식: Red Hat Linux용 업데이트 패키지
파일 이름: iDRAC-with-Lifecycle-Controller_Firmware_K877V_LN_3.21.23.22_A00.BIN
파일 크기: 133.81 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Linux용 Dell 업데이트 패키지는 업데이트 적용 전에 특정 검증 기준이 충족되었는지 확인하는 데 사용할 수 있습니다.
참고: Linux용 업데이트 패키지는 오픈 소스입니다. 자세한 내용은 Linux용 Dell 업데이트 패키지를 참조하십시오.
참고: Linux용 업데이트 패키지는 오픈 소스입니다. 자세한 내용은 Linux용 Dell 업데이트 패키지를 참조하십시오.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
a30bb2d63d4ce2085604eb9062b9e56d
SHA1:
2cd9aa346e5a5cd0b94430f775e19af376056f79
SHA-256:
8b40b269cc4889655690102c71b6a3d1d7bc2658c708a3b91d185e02bb38e78e
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
해당 없음
iDRAC with Lifecycle Controller
INFO,IDRAC,LK,A19,FW3.21.23.22
INFO,IDRAC,LK,D19,FW
INFO,IDRAC,LOCK,3.21.21.21,DP
Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update