Driver Details

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell Inspiron 14 7000 and 15 7000 Gaming System BIOS

This package provides the Dell System BIOS update and is supported on Dell Inspiron 14 7000 Gaming and Inspiron 15 7000 Gaming for Windows and DOS Operating Systems.

Fixes & Enhancements

Fixes:
- Fixed a potential security issue with Bootguard code integrity chaining enforcement.
- Fixed a potential security issue with the Support Assist Pre-Boot feature.

Enhancements:
- Updated processor microcode.

Version

Version 1.0.7, 1.0.7

Category

BIOS

Release date

03 Jul 2017

Last Updated

03 Jul 2017

Importance

Available formats

File Format:Windows/DOS
File Name:Inspiron_14_15_7000_Gaming_1.0.7.exe
Download Type:HTTP
File Size: 6 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
dd6a9ca936572e613011353ce3d855c4
SHA1:
1b1a2efce144a24d137a25738d1d48454616bb28
SHA-256:
4dd4a9d94d6f396c3170d4f342c79e1851b6e9a67e3b4f5d8741d08d0afceee0

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Dell Inspiron 7467/7567
Installation instructions
BIOS Update Executable for Windows/DOS

Download
1. Download the file Inspiron_14_15_7000_Gaming_1.0.7.exe
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.

--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).