PowerConnect,5500,v4.1.0.1,A04

Omstart kreves

Driver-ID : RJ66Y

Viktighet : Valgfritt

Versjon : v4.1.0.1, A04 Nyeste versjon Anbefalt versjon Nyeste og anbefalt versjon

Utgivelsesdato : 08 mai 2012

Nedlastingstype : Fastvare

Kategori : Nettverk

This firmware release is for the 5500 series of PowerConnect switches and includes only bug fixes.

Last ned filer

Filformat: Dette filformatet er et arkiv med filer som kan pakkes ut til en mappe på harddisken. Deretter installerer du fra den mappen.

Filnavn: powerconnect_5500-4101.zip

Filstørrelse: 6.89 MB

Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.

MD5: bd0b66c4ece9e39a7a519227384740c7

SHA1: 8948d9f1c2a2ae9f372cf89c28dfe9980a9203fa

Last ned .ZIP

Feilrettinger og forbedringer

Fixes and Enhancements:

Enhancements: None.

Fixes
- 55xx - Cannot modify port description in GUI on active fiber-optic interface
- GUI shows a fan led in red which does not match the physical status of the front led
- Incorrect OID returned on SNMPGetNext 55xx
- Link issues between PC5548 and e6320 (Dell) laptop (EEE interoperability on Intel NIC)
- PC55xx - SNMP ifType value of 6 for port-channel interfaces
- PC55xx - FATAL ERROR and crash when changing port mode.
- PC55xx - show clock detail output different to user manual
- PC55xx - unable to set speed 1000 via web GUI on ten gigabit interfaces
- PC55xx Connectivity issues with fixed port setting and stacking.
- PC55xx Port-channel inconsistent configuration in general mode
- PC55xx switch crashed on snmpgetnext 1.3.6.1.4.1.89.59.2.3.1.9.2.2
- PC55xx Unable to reach Storm Control page via GUI (Japanese Internet Explorer)
- PC55xx v4.0.1.0 LAG issue using 10Gb interfaces
- PC5524P and PC5548P - power to the PDs is lost every once in awhile
- Prevent creating duplicate ACEs per ACL
- The command ''boot host dhcp'' needs to stay in the configuration if without autosave option.

Instruksjoner for installasjon

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
6. Review the "Downloading the software" file to complete installation.

Reboot will be required

PowerConnect,5500,v4.1.0.1,A04

Last ned filer

Feilrettinger og forbedringer

Kompatible systemer

Operativsystemer som støttes

Instruksjoner for installasjon

Gjelder