Intel NIC Family Version 20.0.0 Firmware for X710, XXV710, and XL710 adapters
Este necesară repornirea Instalat Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This software bundle includes the Dell EMC Update Package to install Intel NIC Firmware Family Version 20.0.x on Intel X710, XXV710, and XL710 adapters. This release provides continued code optimization to improve performance.
Recomandate
Verificați compatibilitatea
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes
- Intel(R) Ethernet 700 Series based adapters are subject to the content of Intel Technical Advisory TA_00380. Please review INTEL_TA_00380 for more detail.
- Resolved an issue where port link status in iDRAC for Intel(R) Ethernet 10G 2P X710 OCP adapter or Intel(R) Ethernet 10G 4P X710 OCP adapter may still appear as up after cable is disconnected.
- Resolved an issue where some X710 based adapters may display the Dell Family Firmware Version (FFV) instead of the OS driver version when viewing the device driver version in iDRAC.
Enhancements
=====
- The Intel(R) X710 and XXV710 based adapters now support the Permit Total Port Shutdown X-UEFI attribute. Please see the Intel(R) NIC Family Version 20.0.0 User Guide for usage details.
- Added ability to direct traffic to VFs based on the IPv4 destination IP address on both tunneled and non-tunneled packets.
- Added capability for FEC configuration through the UEFI HII for XXV710 based adapters.
Citiți mai multe- Intel(R) Ethernet 700 Series based adapters are subject to the content of Intel Technical Advisory TA_00380. Please review INTEL_TA_00380 for more detail.
- Resolved an issue where port link status in iDRAC for Intel(R) Ethernet 10G 2P X710 OCP adapter or Intel(R) Ethernet 10G 4P X710 OCP adapter may still appear as up after cable is disconnected.
- Resolved an issue where some X710 based adapters may display the Dell Family Firmware Version (FFV) instead of the OS driver version when viewing the device driver version in iDRAC.
Enhancements
=====
- The Intel(R) X710 and XXV710 based adapters now support the Permit Total Port Shutdown X-UEFI attribute. Please see the Intel(R) NIC Family Version 20.0.0 User Guide for usage details.
- Added ability to direct traffic to VFs based on the IPv4 destination IP address on both tunneled and non-tunneled packets.
- Added capability for FEC configuration through the UEFI HII for XXV710 based adapters.
Versiune
20.0.17, A00
Data lansării:
13 Apr 2021
Tip de descărcare
Firmware
Categorie
Rețea
Importanță
RecommendedDell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Formate disponibile View Important Information
Format fișier Update Package for MS Windows 64-Bit.
Nume fișier: Network_Firmware_DK4G2_WN64_20.0.17_A00.EXE
Dimensiune fișier: 37.75 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
8761493c06259ba67f0eec93f8b7d438
SHA1:
3b93a18c52be26edbdc39e9a4adba405f2eb72d3
SHA-256:
a294442e2268a6ea56c4f9d7eba4b5ec74fe639bf413bddb5003678faac5db57
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: Network_Firmware_DK4G2_LN_20.0.17_A00.BIN.sign
Dimensiune fișier: 226 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
96ae214dcd0eebe7fdfd0646e9f51b7a
SHA1:
80132f0d5a1f01037aa980a3a6d561f488310cff
SHA-256:
1868039e44abec28073acc59718d2cfd8b583bb8e645d7aa6255b7856152e4c4
Format fișier External release notes
Nume fișier: fw_release_x710.txt
Dimensiune fișier: 7.86 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format contains plain text which can be viewed with a standard text editor.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
138d61b927a274e8ef6f67843d0657ac
SHA1:
574ed30b45500f64eb8e570e7346f3f1ac4f7fe1
SHA-256:
15eb22aac184f3f1ea641a9c0432ab86b740ef957780f3f7720e65b084454a70
Format fișier Update Package for Red Hat Linux
Nume fișier: Network_Firmware_DK4G2_LN_20.0.17_A00.BIN
Dimensiune fișier: 35.41 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
960f45ab30b04f71f5621c3c2922b016
SHA1:
4b543114e5a4827565adb09a4fd0af4594f39688
SHA-256:
c7fbda6119f929563ab92066452dc439c187033e8fded9e843fff666c12566c6
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
This firmware must be installed by one of the following methods.
- Execution from a Red Hat Enterprise Linux command shell.
- Execution from a SUSE Linux Enterprise Server command shell.
- Execution from a supported Windows Operating System.
- Upload of the EXE file via the iDRAC GUI > Maintenance > System Update interface.
- Upload of the EXE file via iDRAC using racadm or WSMAN
- Upload of the EXE file via the Lifecycle Controller GUI
Once installed, the firmware may interoperate with any operating system for which a compatible driver is present.
- Execution from a Red Hat Enterprise Linux command shell.
- Execution from a SUSE Linux Enterprise Server command shell.
- Execution from a supported Windows Operating System.
- Upload of the EXE file via the iDRAC GUI > Maintenance > System Update interface.
- Upload of the EXE file via iDRAC using racadm or WSMAN
- Upload of the EXE file via the Lifecycle Controller GUI
Once installed, the firmware may interoperate with any operating system for which a compatible driver is present.
Sisteme de operare acceptate
AZURE STACK HCI
Nu se aplică
Red Hat® Enterprise Linux 7
Red Hat® Enterprise Linux 8
SuSE Linux ES 15
Windows Server 2019 LTSC
Windows Server 2016
Windows 10 pe 64 de biți
Se aplică pentru
INFO,FW,NIC,X710,20.0.17,15G
Intel Ethernet Network Adapter X710-DA2 Type 2 OCP Mezzanine - Dell FW
Intel Ethernet Network Adapter XXV710-DA2 Type 2 OCP Mezzanine - Dell FW
Intel(R) 10GbE 4P X710-t Adapter
Intel(R) Ethernet 10G 2P X710 OCP
Intel(R) Ethernet 10G 2P X710-k bNDC
Intel(R) Ethernet 10G 2P X710-T2L-t Adapter
Intel(R) Ethernet 10G 2P X710-T2L-t OCP
Intel(R) Ethernet 10G 4P X710 OCP
Intel(R) Ethernet 10G 4P X710 SFP+ rNDC
Intel(R) Ethernet 10G 4P X710-k bNDC
Intel(R) Ethernet 10G 4P X710-T4L-t Adapter
Intel(R) Ethernet 10G 4P X710-T4L-t OCP
Intel(R) Ethernet 10G 4P X710/I350 rNDC
Intel(R) Ethernet 25G 2P XXV710 Adapter
Intel(R) Ethernet 25G 2P XXV710 Mezz
Intel(R) Ethernet 40G 2P XL710 QSFP+ rNDC
Intel(R) Ethernet Converged Network Adapter X710 - Dual Port
Intel(R) Ethernet Converged Network Adapter X710 - Quad Port
Intel(R) Ethernet Converged Network Adapter XL710-Q2
Intel(R) Ethernet OCP Mezzanine
Instrucțiuni de instalare
Windows Update Package Installation:
Download
1. Click the Download Now link to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the information in the dialog window.
3. Download and install any prerequisites that are identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
====================================================
[Alternative] Installation via Lifecycle Controller.
====================================================
1. Copy the downloaded firmware DUP for Windows to removable USB storage.
2. Insert the removable USB storage in a USB port of the server to be updated.
3. Reboot the server.
4. Press the F10 key to enter Lifecycle Controller.
5. In the left navigation pane, click Firmware Update.
6. In the main pane click Launch Firmware Update.
7. On the Step 1 of 3: Select Update Repository page, select Local Drive.
8. Click the Next button.
9. On the Step 2 of 3: Enter Access Details page, select the removable USB storage from the Local Drive drop-down list.
10. Type the path and filename of the firmware DUP in the File Path or Update Package Path text box.
Example: \Network_Firmware_DK4G2_WN64_20.0.17_A00.exe
11. Click the Next button.
12. On the Step 3 of 3: Select Updates page, select the checkbox next to one, or more, of the Available System Updates.
13. Click the Apply button to complete the installation process.
==================================
Linux Update Package Installation:
==================================
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Make sure that the network adapter's base driver is loaded in the OS
2. Read over the release information presented by executing the
./Network_Firmware_DK4G2_LN_20.0.17_A00.BIN --version command from the shell.
3. Download and install any prerequisites identified in the above step before proceeding.
4. Run the update by executing ./Network_Firmware_DK4G2_LN_20.0.17_A00.BIN from the shell.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for Network_Firmware_DK4G2_LN_20.0.17_A00.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system)
2. Verify the Dell Update Package by using its signature file, Network_Firmware_DK4G2_LN_20.0.17_A00.BIN.sign
Download
1. Click the Download Now link to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the information in the dialog window.
3. Download and install any prerequisites that are identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
====================================================
[Alternative] Installation via Lifecycle Controller.
====================================================
1. Copy the downloaded firmware DUP for Windows to removable USB storage.
2. Insert the removable USB storage in a USB port of the server to be updated.
3. Reboot the server.
4. Press the F10 key to enter Lifecycle Controller.
5. In the left navigation pane, click Firmware Update.
6. In the main pane click Launch Firmware Update.
7. On the Step 1 of 3: Select Update Repository page, select Local Drive.
8. Click the Next button.
9. On the Step 2 of 3: Enter Access Details page, select the removable USB storage from the Local Drive drop-down list.
10. Type the path and filename of the firmware DUP in the File Path or Update Package Path text box.
Example: \Network_Firmware_DK4G2_WN64_20.0.17_A00.exe
11. Click the Next button.
12. On the Step 3 of 3: Select Updates page, select the checkbox next to one, or more, of the Available System Updates.
13. Click the Apply button to complete the installation process.
==================================
Linux Update Package Installation:
==================================
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Make sure that the network adapter's base driver is loaded in the OS
2. Read over the release information presented by executing the
./Network_Firmware_DK4G2_LN_20.0.17_A00.BIN --version command from the shell.
3. Download and install any prerequisites identified in the above step before proceeding.
4. Run the update by executing ./Network_Firmware_DK4G2_LN_20.0.17_A00.BIN from the shell.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for Network_Firmware_DK4G2_LN_20.0.17_A00.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system)
2. Verify the Dell Update Package by using its signature file, Network_Firmware_DK4G2_LN_20.0.17_A00.BIN.sign
Aveți nevoie de ajutor cu problemele de conexiune la rețea?
Găsiți o soluție în ghidul de depanare a rețelei de la DellAjutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.