Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Server BIOS PowerEdge C6320 Version 2.8.0
Este necesară repornirea Instalat Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
This release contains new Intel Xeon Processor Scalable Family Processor Microcode Enhancement to address security vulnerability CVE-2018-3639 and CVE-2018-3640. This release contains BIOS firmware version 2.8.0 for Dell PowerEdge C6320.
Recomandate
Verificați compatibilitatea
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs. Arătați-mi cum
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul. Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixed issues (this release)
- For memory sizes less than 1 TB, updated the MTRR algorithm to the same behavior as 2.4.3 and earlier BIOS versions.
- Network Stack IPv4 is enhanced by using RFC3021 to support the 31-bit subnet mask for point-to-point link.
New and enhanced features
- Enhancement to address security vulnerability CVE-2018-3639 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3639).
- Enhancement to address security vulnerability CVE-2018-3640 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3640).
- Updated the Intel Xeon Processor E5-2600 v4 Product Family Processor Microcode to version 0x0b00002E.
- Updated the Xeon Processor E5-2600 v3 Product Family Processor Microcode to version 0x3D.
- Added setup option QPI Link L1 Power Management. Default is set to Enabled.
- Added proper identification for maximum DIMM speed of 2666 MHz.
Citiți mai multe- For memory sizes less than 1 TB, updated the MTRR algorithm to the same behavior as 2.4.3 and earlier BIOS versions.
- Network Stack IPv4 is enhanced by using RFC3021 to support the 31-bit subnet mask for point-to-point link.
New and enhanced features
- Enhancement to address security vulnerability CVE-2018-3639 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3639).
- Enhancement to address security vulnerability CVE-2018-3640 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3640).
- Updated the Intel Xeon Processor E5-2600 v4 Product Family Processor Microcode to version 0x0b00002E.
- Updated the Xeon Processor E5-2600 v3 Product Family Processor Microcode to version 0x3D.
- Added setup option QPI Link L1 Power Management. Default is set to Enabled.
- Added proper identification for maximum DIMM speed of 2666 MHz.
Versiune
2.8.0, 2.8.0
Data lansării:
14 Jun 2018
Tip de descărcare
Interfața BIOS
Categorie
BIOS
Importanță
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Formate disponibile View Important Information
Format fișier Update Package for MS Windows 64-Bit.
Nume fișier: BIOS_VJTT9_WN64_2.8.0.EXE
Dimensiune fișier: 17.72 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
4c0ea6b9a2a159fb8144f1705171b1c7
SHA1:
9a0af407e39543143a843a62c9d12a46f58340ea
SHA-256:
c403b30c1b5503ddf41be86d57fd0da2a412b31402383fbb466fd13c03d6a0fc
Format fișier A GnuPG file which contains a cryptographic signature
Nume fișier: BIOS_VJTT9_LN_2.8.0.BIN.sign
Dimensiune fișier: 226 Bytes
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
dbfba2ebdc27f6022574669f11f10edb
SHA1:
4629b5e6866c4557a399bab468cc720cbeb3bd49
SHA-256:
7ec9ce1b0b1e2654ec9a5c355325b9903071d89fc94bab794dd8e569ddb1d047
Format fișier A self-extracting file for use in 64-bit machines
Nume fișier: c6320-020800.efi
Dimensiune fișier: 5.37 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains compressed content that can be executed from the EFI Shell or EFI Boot Manager. Download the file to the EFI partition on a removable media device. Insert the removable media, then reboot the system and run the program from the EFI Shell or EFI Boot Manager.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
16f9d97e6565a24a31645c256205af38
SHA1:
84704da7a37f6624a434cabe5750c4f2b9255811
SHA-256:
c0b8b259d6fd7d429d8030ff60617ebf1e0ffe7c2226d422f679811057d00237
Format fișier An archive of PDF files to provide help and procedural information to the customers
Nume fișier: C6320_BIOS_2.8.0_RN.pdf
Dimensiune fișier: 271.35 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
227dec9d8b1d377f6da104ab47a439f3
SHA1:
3619085454e268ffa0dcb77712f328e3c7412e1b
SHA-256:
f49797c4ce167f32603202bf1d0eb4e8e4aabf5bd9b9ff49467e767bc10dcfad
Format fișier Actualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier: BIOS_VJTT9_WN32_2.8.0.EXE
Dimensiune fișier: 12.83 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
28ac948290b70ad6818494d658b2a44d
SHA1:
31f1d109e1ec21ce1cde46fdeab4a6d0e4a5246e
SHA-256:
805d9957a23fedb44cbbdfc1f8f3a8b1593066344cbf23c373f577d07a19d580
Format fișier Update Package for Red Hat Linux
Nume fișier: BIOS_VJTT9_LN_2.8.0.BIN
Dimensiune fișier: 14.32 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
06d51d4ade70ea40e980a6779e5dc8b7
SHA1:
2ba7d23fbce1130e546018c567eca2919aad0f9c
SHA-256:
5d7a5933242d9f39ca77467f1d43cfd1f94f733e05db93e523926c8608eaffe8
Prin descărcare, acceptați termenii Dell Software License Agreement.
Informații importante
Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.
Sisteme de operare acceptate
Nu se aplică
Se aplică pentru
PowerEdge C6320 BIOS
Instrucțiuni de instalare
Dell Update Package Instructions for DRMK
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Aveți nevoie de ajutor cu problemele legate de BIOS?
Găsiți o soluție în ghidul de depanare a BIOS-ului de la DellAjutor și tutoriale pentru drivere
Pentru mai multe descărcări, accesați Drivere și descărcări. Pentru ajutor privind utilizarea informațiilor de pe această pagină, accesați Tutoriale și ajutor pentru drivere.