Este necesară repornireaINSTALATE AUTOMATAcest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
This package provides Dell TPM 1.2 Update Firmware and is supported on Dell Latitude/OptiPlex/Precision/XPS series running the following Operating Systems: Windows 7-32bit, Windows 8.1-32bit & Windows 10-32bit
Recomandate
Găsiți cea mai bună descărcare pentru sistemul dvs.
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.
Asistență căutare
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs.Arătați-mi cum
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul.Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes - Not Applicable Enhancements - Added TPM 1.2/2.0 mode switch support from TPM 2.0 firmware version 1.3.2.8
Dell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
Installation instructions Dell TPM Update Utility for Windows/DOS
Download 1. Click "Download File", to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Clear the TPM (See Notes 2, 3 and 4) 1. Before running the TPM update utility, clear the TPM Owner.
Disable TPM Auto Provisioning in Windows (See Note 4) 1. Boot to Windows 2. Launch the PowerShell Command window in Administrator mode 3. At the Powershell command prompt, execute the command: > Disable-TpmAutoProvisioning 4. Confirm the following results: - AutoProvisioning : Disabled 5. Reboot the system, to BIOS Setup by pressing F2. 6. Navigate to "Security > TPM 1.2/2.0 Security". 7. Click the "Clear" checkbox and select "Yes" at the prompt to clear the TPM settings. (You can skip it if the item is grayed out) 8. Click "Exit" to save changes. 9. Reboot system to Windows. 10. Confirm the TPM is not owned. The TPM should no longer be automatically provisioned by Windows. 11. When the TPM update is finished, launch the PowerShell command in Administrator mode to re-enable the auto provisioning. > Enable-TpmAutoProvisioning 12. Confirm the following results: - AutoProvisioning : Enabled
Run the TPM update utility from Windows environment 1. Browse to the location where you downloaded the file and double-click the new file. 2. Windows System will auto restart and update the TPM during the system startup. 3. When the TPM update is finished, the system will auto reboot to take effect.
Run the TPM update utility from DOS environment, if Legacy Boot mode (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt. 3. Run the file by typing copied file name where the executable is located. 4. DOS system will auto restart and update the TPM during the system startup. 5. When the TPM update is finished, the system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option". 3. Change "UEFI" to "Legacy" of Boot List Option. 4. Click "Apply", "Exit" to save changes and reboot system. 5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt. 6. Run the file by typing copied file name where the executable is located. 7. When the TPM update is finished, the system will auto reboot to take effect. 8. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option". 9. Change "Legacy" to "UEFI" Boot Option. 10. Click "Apply", "Exit" to save changes and reboot system.
-------------------------------------------------------------------------------- Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files. Note 2: If BitLocker is enabled on your system, please make sure you suspend BitLocker encryption before updating TPM on a BitLocker enabled system. Note 3: The TPM must be ON and Enabled in BIOS Setup, and the TPM must not be owned. If the TPM is owned, go to BIOS Setup and clear the TPM before proceeding. You may need to run TPM.msc to re-initial the TPM under Windows OS. Note 4: When the TPM ownership is cleared, some operating system will automatically take ownership of the TPM on the next boot (TPM AutoProvisioning). This feature will need to be disabled in the OS to proceed with the update.