Dell PERC 6/i Integrated Firmware Update
AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
This package provides the Dell PERC 6/i Integrated Firmware Update and is supported on the Compellent, Enterprise Servers and Powervault models that are running the following Windows Operating System: NA.
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Fixes
- Fixed an issue where the user might see a misleading error message stating that Number of devices exceeded the maximum limit of devices per quad.
Enhancements
- N/A
Läs mer- Fixed an issue where the user might see a misleading error message stating that Number of devices exceeded the maximum limit of devices per quad.
Enhancements
- N/A
Version
6.3.3-0002, A-00
Utgivningsdatum
22 mars 2013
Hämtningstyp
Firmware
Kategori
SAS RAID
Prioritet
RekommenderasDell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Tillgängliga format Visa viktig information
Filformat: Uppdateringspaket för Microsoft Windows (32-bitars)
Filnamn: SAS-RAID_Firmware_F96NR_WN32_6.3.3-0002_X00.EXE
Filstorlek: 10.49 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dells uppdateringspaket (DUP) i Microsoft Windows 32-bitarsformat har utformats för att köras på 64-bitarsversioner av Microsoft Windows. Dells uppdateringspaket (DUP) i Microsoft Windows 64-bitarsformat kan endast köras på 64-bitarsversioner av Microsoft Windows. När du väljer en uppdatering av en enhetsdrivrutin bör du välja en som passar till ditt operativsystem.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
38410f166617c87b57bddbcade18e622
SHA1:
593c8c00e8a97f48cd79a1f779ada3e84f688c5c
SHA-256:
3659ec8143dd7ebaa66c116cef32413b8cf320a42ee76c6142d0276de3d0b5bd
Filformat: En GnuPG-fil som innehåller en kryptografisk signatur
Filnamn: SAS-RAID_Firmware_F96NR_LN_6.3.3-0002_X00.BIN.sign
Filstorlek: 194 Bytes
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
GnuPG-signaturen för Red Hat Linux-uppdateringspaket kan användas för att autentisera Dells identitet i det korrelerade Red Hat Linux-uppdateringspaketet.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
d6d72a39620ad98d7b228f6a12f29aa6
SHA1:
41b3b10117f60022b7ec01369146d3d4ac3e21af
SHA-256:
66664019dca12bf07c9fae2790a7b74635921311fbed872a33235ef6df6eb3fd
Filformat: Extern ZipPack
Filnamn: SAS_RAID_PERC6i-int_6.3.3-0002_A00_ZPE.exe
Filstorlek: 1.92 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Den här filen innehåller en komprimerad (eller zippad) uppsättning filer. Hämta filen till en mapp på hårddisken och kör sedan filen (dubbelklicka på den) för att packa upp filerna. Följ anvisningarna för att slutföra installationen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
e0b79e72b2c260257d6775ff6559e3f6
SHA1:
54653f4663b843dd8ccd76bdc641d335cb4424a5
SHA-256:
261200bdd4069b85f349ea8e8c274a54c65878d36c8055bd12ac23f18a16339a
Filformat: Extern versionsinformation
Filnamn: SAS_RAID_Firmware_PERC6i-int_RELNOTES_6.3.3-0002_A00.txt
Filstorlek: 15.03 KB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Det här filformatet innehåller oformaterad text som kan visas med en vanlig textredigerare.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
cc97fbc722f532eae30dda128f1e0fff
SHA1:
d4ea3913ecfb65e5b0b39d5e08ccb13b379caccc
SHA-256:
0e36d007ae77af89b7df53f76ad25f62cac69ec15b732f94e9af7bdc2294779b
Filformat: Uppdateringspaket för Red Hat Linux
Filnamn: SAS-RAID_Firmware_F96NR_LN_6.3.3-0002_X00.BIN
Filstorlek: 10.46 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dell Uppdateringspaket för Linux kan användas som en fristående applikation som säkerställer att specifika valideringskriterier uppfylls och sedan utför en uppdatering.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
c4a322d9eda3d8725fbe10db10acdf70
SHA1:
633e9212336a6566dcdd95c476882b4c32336f86
SHA-256:
4718150c5f759de66cc9b7b46c135633ffc6a2cc629fc399dec7e3d61fd913fd
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Viktig information
1. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification will be translated as "ATA" followed by blanks.
2. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
3. If a virtual disk is configured with write-back cache enabled and some or all of its physical disks are removed from the system or enclosure, the RAID controller will preserve the virtual disk's write cache. The controller will flush the preserved cache when the physical disks are replaced and the foreign configuration is imported. Any attempt to update controller firmware will be blocked when cache is preserved for a virtual disk.
4. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hot spare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hot spare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration to another system, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
6. The controller restricts the importing of virtual disks that are undergoing RAID Level Migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
7. EMM changes or drive migrations are not supported during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline. Dell recommends the user to perform a data backup before starting these operations.
8. This version of firmware will not ensure complete compatibility with an older version of management applications. OpenManage 5.5 or greater is recommended.
9. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
10. Important Information for Update Packages for Microsoft Windows
a. Do not run other applications while executing Dell Update Packages.
b. Do not run storage controller update packages if the controller is in use
by other applications. The firmware upgrade may fail if any of the
RAID controllers in the system are performing I/O background tasks
(consistency checks, background initializations, rebuilds, or
reconstructions). Allow the background tasks to complete before
attempting to upgrade the firmware. Patrol Read tasks will not affect
firmware upgrades.
11. Important Information for Update Packages for Linux
a. Do not run other applications while executing Dell Update Packages.
b. If the following error occurs, "Error while loading shared libraries:
libstdc++.so.5: cannot open shared object file: No such file or
directory", you must install the compatibility libraries. These
libraries can be found on the installation media or online. To install
the compatibility libraries, use the following commands:
"rpm -ih compat-libstdc++-33-3.2.3.-*.i386.rpm" for RHEL 4 or 5
"rpm -ih compat-libstdc++-5.0.7-*.x86_64.rpm" for SLES 10
c. When Update Packages stop abruptly due to a power outage or abnormal
termination, perform the following steps:
- Remove the lock file.
- Type the following command: rm -f /var/lock/.spsetup
- Run the Update Package again to reapply the update.
d. Do not ru
2. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
3. If a virtual disk is configured with write-back cache enabled and some or all of its physical disks are removed from the system or enclosure, the RAID controller will preserve the virtual disk's write cache. The controller will flush the preserved cache when the physical disks are replaced and the foreign configuration is imported. Any attempt to update controller firmware will be blocked when cache is preserved for a virtual disk.
4. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hot spare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hot spare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration to another system, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
6. The controller restricts the importing of virtual disks that are undergoing RAID Level Migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
7. EMM changes or drive migrations are not supported during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline. Dell recommends the user to perform a data backup before starting these operations.
8. This version of firmware will not ensure complete compatibility with an older version of management applications. OpenManage 5.5 or greater is recommended.
9. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
10. Important Information for Update Packages for Microsoft Windows
a. Do not run other applications while executing Dell Update Packages.
b. Do not run storage controller update packages if the controller is in use
by other applications. The firmware upgrade may fail if any of the
RAID controllers in the system are performing I/O background tasks
(consistency checks, background initializations, rebuilds, or
reconstructions). Allow the background tasks to complete before
attempting to upgrade the firmware. Patrol Read tasks will not affect
firmware upgrades.
11. Important Information for Update Packages for Linux
a. Do not run other applications while executing Dell Update Packages.
b. If the following error occurs, "Error while loading shared libraries:
libstdc++.so.5: cannot open shared object file: No such file or
directory", you must install the compatibility libraries. These
libraries can be found on the installation media or online. To install
the compatibility libraries, use the following commands:
"rpm -ih compat-libstdc++-33-3.2.3.-*.i386.rpm" for RHEL 4 or 5
"rpm -ih compat-libstdc++-5.0.7-*.x86_64.rpm" for SLES 10
c. When Update Packages stop abruptly due to a power outage or abnormal
termination, perform the following steps:
- Remove the lock file.
- Type the following command: rm -f /var/lock/.spsetup
- Run the Update Package again to reapply the update.
d. Do not ru
Operativsystem som stöds
Ej tillämpligt
Gäller
PERC 6/i Integrated
Installationsanvisningar
Dell Update Package Instructions
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (via WinZip) with Setup.exe File
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop.
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\F96NR". (Where 'F96NR' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\F96NR" (where 'F96NR' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (via WinZip) with Setup.exe File
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop.
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\F96NR". (Where 'F96NR' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\F96NR" (where 'F96NR' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner