Stäng inte av datorn eller koppla från strömkällan medan BIOS uppdateras. Annars kan datorn skadas. Under uppdateringen kommer datorn att startas om och en svart skärm kan visas en kort stund.
Läs installationsanvisningarna och den viktiga informationen nedan innan du uppdaterar.
Dell OptiPlex 3050 System BIOS
Omstart krävsAUTOMATISKT INSTALLERADDen här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices.
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt system
Sök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare.Visa mig hur
Inga resultat hittades. Vi kunde inte hitta något som matchade din sökning. Ändra din sökning och försök igen.
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om.Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Fixes: - Addressed 16-bit application can not be executed. Enhancements: - Updated Intel ME Firmware to address security advisories INTEL-SA-00086 (CVE-2017-5705, CVE-2017-5708, CVE-2017-5711 & CVE-2017-5712) & INTEL-SA-00101(CVE-2017-13077, CVE-2017-13078 & CVE-2017-13080). (ME driver updated is necessary) - Updated the handling of pre-boot authentication information by firmware. - Updated UEFI variable input validation. - Updated the handling of 3rd party Option ROM loading. - Updated SPI flash command configuration settings. - Adds missing WSMT code change for DACI class 2 selector 0. Make the obsolete security function more clearly obsolete. - Improved Auto-Recovery function more friendly.
Dell Technologies rekommenderar starkt att du installerar den här viktiga uppdateringen så snart som möjligt. Uppdateringen innehåller kritiska buggfixar och ändringar som förbättrar funktionaliteten, pålitligheten och stabiliteten i ditt Dell-system. Den kan även innehålla säkerhetskorrigeringar och andra funktionsförbättringar.
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Det här filformatet består av en körbar BIOS-fil. Det universella formatet (Windows/MS DOS) kan användas för installation från alla Windows- eller MS DOS-miljöer.
- If your BIOS version is earlier than 1.7.4, you must update the BIOS to version 1.7.4 before upgrading to the latest version. - BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation 1. Click Download File. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file. 4. Double-click the new file. 5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off the power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation 1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive. 2. Insert the USB drive into any USB port. 3. Power on the system. 4. At the DELL logo screen, press F12 to access the one-time boot menu. 5. Select BIOS Flash Update in the Other Options section. 6. Click the ... button to browse the USB drive to locate the downloaded file. 7. Select the file and click OK. 8. Verify the existing system BIOS information and the BIOS update information. 9. Click Begin Flash Update. 10. Review the Warning message and click Yes to proceed with the update. The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Behöver du hjälp med BIOS-problem?
Hitta en lösning i Dells manual för användning och felsökning av BIOS.