WD BCQ firmware G138 for model numbers WUSTVA1A1BSS200, WUSTVA176BSS200, WUSTVA138BSS200, WUSTVA119BSS200, WUSTVA196BSS200,WUSTM3216BSS200, WUSTM3280BSS200, WUSTM3240BSS200,WUSTR6464BSS200, WUSTR6432BSS200, WUSTR6416BSS200, WUSTR6480BSS200
Установлено Цей файл було автоматично встановлено в межах останнього оновлення. Якщо у вас виникли проблеми, ви можете вручну завантажити його й повторно встановити.Можливо, вміст цієї сторінки перекладено автоматично. Щоб надіслати відгук, заповніть форму внизу сторінки.
This release contains firmware version G138 for WD BCQ drives. Vendor model numbers WUSTR6464BSS200, WUSTR6432BSS200, WUSTR6416BSS200, WUSTR6480BSS200, WUSTVA1A1BSS200, WUSTVA176BSS200, WUSTVA138BSS200, WUSTVA119BSS200, WUSTVA196BSS200, WUSTM3216BSS200, WUSTM3280BSS200, WUSTM3240BSS200.
Рекомендується
Перевірка сумісності
Введіть дані про продукт, щоб переглянути найновішу інформацію про драйвер для вашої системиВведіть сервісний код або модель продукту Dell
Хочете знайти свій продукт? Введіть його ідентифікатор. Покажіть мені, як
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Увійдіть у Windows як адміністратор, щоб використовувати автоматичне сканування. Якщо ви вже ввійшли в систему як адміністратор і бачите це повідомлення, виконайте перезавантаження. Вашою системою керує ваш ІТ-адміністратор, і її функції можуть бути обмежені.
Перегляньте інші оновлення. Використовуйте SupportAssist, щоб знайти всі останні оновлення драйверів для свого пристрою.
Виправлення та покращення
- Fix potential premature wear-out issue on drives in certain system environments
- Fix for Self-Initiated Reset after drive usage history log receives excessive entries.
Більше- Fix for Self-Initiated Reset after drive usage history log receives excessive entries.
Версія
G138, A00
Дата випуску
07 черв. 2024
Тип завантаження
Firmware
Категорія
Накопичувач SAS
Важливість
ТерміновоDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Доступні формати View Important Information
Формат файлу: Update Package for MS Windows 64-Bit.
Ім’я файлу: SAS-Drive_Firmware_8W5WF_WN64_G138_A00.EXE
Розмір файлу: 12 MB
Це великий файл. Завантаження може зайняти деякий час, залежно від швидкості підключення.
Опис формату:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
Щоб забезпечити цілісність завантаження, перевірте значення контрольної суми.
MD5:
1b5359376c483c1f5175bf9323a42d50
SHA1:
46cf8275e7fb5c448812c48ccc8d07bc102ff1f6
SHA-256:
53237bc3cefd54384d5fe5ad8c0c7ea55de3889819ec815fcbc40fb67bc7fa7a
Формат файлу: A GnuPG file which contains a cryptographic signature
Ім’я файлу: SAS-Drive_Firmware_8W5WF_LN64_G138_A00.BIN.sign
Розмір файлу: 226 Bytes
Це великий файл. Завантаження може зайняти деякий час, залежно від швидкості підключення.
Опис формату:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Щоб забезпечити цілісність завантаження, перевірте значення контрольної суми.
MD5:
ddfaead522ba426fed4c567e21dbaf7f
SHA1:
e1c7965b59a89f494329ffc93e0ddc60b696653a
SHA-256:
dbad2c0baf835ad78896e87f66a7e6986559d60f5904d3d5aafac879e9ff3b9f
Формат файлу: Update Package for Red Hat Linux
Ім’я файлу: SAS-Drive_Firmware_8W5WF_LN64_G138_A00.BIN
Розмір файлу: 7.49 MB
Це великий файл. Завантаження може зайняти деякий час, залежно від швидкості підключення.
Опис формату:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Щоб забезпечити цілісність завантаження, перевірте значення контрольної суми.
MD5:
e58b2736f6202b27c87c70cc28972859
SHA1:
a37c28df600ffaefc8e16491a3647e57b2e08b86
SHA-256:
b8bf1d54f2ef28084b7f6ccedff8c47f93600cc2575bc452c96f82c7588049fd
Завантажуючи, ви приймаєте умови Ліцензійної угоди щодо програмного забезпечення Dell.
Важлива інформація
This release contains firmware version G138 for WD BCQ drives. Vendor model numbers WUSTR6464BSS200, WUSTR6432BSS200, WUSTR6416BSS200, WUSTR6480BSS200, WUSTVA1A1BSS200, WUSTVA176BSS200, WUSTVA138BSS200, WUSTVA119BSS200, WUSTVA196BSS200, WUSTM3216BSS200, WUSTM3280BSS200, WUSTM3240BSS200.
- Fix potential premature wear-out issue on drives in certain system environments
- Fix for Self-Initiated Reset after drive usage history log receives excessive entries.
: This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
- Fix potential premature wear-out issue on drives in certain system environments
- Fix for Self-Initiated Reset after drive usage history log receives excessive entries.
: This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Підтримувані операційні системи
Novell SuSE Linux ES 11
Windows Server 2008 x64
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Linux
Windows Server 2012
Не застосовується
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Ent Linux 5
Red Hat® Enterprise Linux 8
Red Hat Enterprise Linux 9
Windows Storage Server 2012 R2
Novell SuSE Linux ES 10
SuSE Linux 11 для ПК
SUSE Linux ES 12
SuSE Linux ES 15
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2003
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows Server 2025 LTSC
Windows Server 2008 R2
Windows Storage Server 2012
Windows Server 2016
Windows Server 2003 x64
Застосовується до
WD Bear Cove Quantum 10DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTM3216BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42695
WD Bear Cove Quantum 10DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTM3240BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42693
WD Bear Cove Quantum 10DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTM3280BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42694
WD Bear Cove Quantum 10DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTVA119BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42912
WD Bear Cove Quantum 10DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTVA138BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42719
WD Bear Cove Quantum 10DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTVA176BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42720
WD Bear Cove Quantum 10DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTVA196BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42718
WD Bear Cove Quantum 10DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTVA1A1BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42721
WD Bear Cove Quantum 3DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTR6416BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42736
WD Bear Cove Quantum 3DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTR6432BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42748
WD Bear Cove Quantum 3DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTR6464BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42749
WD Bear Cove Quantum 3DWPD,SSD,12Gbps SAS, 2.5,512e, ISE
Model Number: WUSTR6480BSS200
Regulatory Model Number: UCQSSC
Vendor PN: 0B42735
Інструкції зі встановлення
Dell Update Package instructions for Windows Dup:
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ Serial-ATA_Firmware__LN__A00.BIN " from the shell.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, Serial-ATA_Firmware__LN__A00.BIN.sign.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ Serial-ATA_Firmware_
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, Serial-ATA_Firmware_
Довідка й інструкції щодо драйверів
Щоб відкрити більше завантажень, перейдіть на Драйвери та завантаження. Щоб отримати допомогу щодо використання інформації на цій сторінці, див. Довідку та посібники для драйверів.