Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: XPS_9570_01_03_01.exe
File size: 10.82 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 8c8cebf7afcbde512a9f4f2041d0288c
SHA1: 47e2a1d17155b123299d627ccbae203459baa72f
SHA-256: b5cdd080c810329aa5d97cb949ff538fc1a803edab5342484fbcb854eb2623de
Fixes & Enhancements
- Mitigate coil whine noise
Supported Operating Systems
Installation instructions
Updating the BIOS from Windows
Note 1: Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the file.
4. Click Yes to open the BIOS update utility.
5. Click Update to initiate the update process. A progress bar is displayed.
6. Click Restart to restart the system once the progress bar reaches 100%.
The update process initiates at the Dell logo and an update initiation message is displayed with a progress bar. The system shuts down after the update is complete.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ XPS_15_9570_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and XPS_15_9570_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.