Driver Details

Firmware Update for enabling or disabling Dynamic Brightness Control

Firmware Update for enabling or disabling Dynamic Brightness Control

Fixes & Enhancements

1.Use Dino firmware package to flash Dino QHD+ panel on Dino2 system.
2. Remove Intel Gfx driver restriction version.


Version, A01



Release date

24 Mar 2016

Last Updated

24 Mar 2016


Available formats

File Format:Hard-Drive
File Name:APP_QHDFW_DBC_W81X64_W10X64_A01_Setup-513GY_ZPE.exe
Download Type:HTTP
File Size: 8 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows 8.1, 64-bit
Windows 10, 64-bit
Installation instructions

1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

1. Browse to the location where you downloaded the file and double-click the new file.
2. After the files have been extracted, execute the .exe file.
3. Follow the prompts to perform the update.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).