AuthenTec AES2810 Windows Biometric Framework Driver for integrated fingerprint readers

This is the AuthenTec Windows Biometric Framework (WBF) Driver supporting Integrated AES2810 Fingerprint Reader devices.Please refer to below Compatible Systems and Supported Operating Systems for more information.

Fixes & Enhancements

Initial Release.

Version

Version 3.4.2.1016, A01

Category

Security

Release date

10 Nov 2014

Last Updated

20 Sep 2016

Importance

Available formats

File Format:Hard-Drive
File Name:AES2810_WBF_Setup_A01_64bit_ZPE.exe
Download Type:HTTP
File Size: 18 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c25c1aba9ec74f656be26a7ee4bc0480
SHA1:
26d51830546a20728f0fb3c69ba2a613fcb06749
SHA-256:
ec64519f9b0b8eaa5633fc5ea9a681ee6324024d6348142eeae2ff80bbd219c5

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows 7, 64-bit
Windows 8, 64-bit
Windows 10, 64-bit
Applies to
Authentec AES2810 Windows Biometric Framework
Installation instructions
Hard Drive Installation (via WinZip) with Setup.exe File

Download

1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install

1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\DFDJ9". (Where 'DFDJ9' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\DFDJ9" (where 'DFDJ9' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).