Download Files
File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
File Name: DRVR-R58591.exe
File size: 1.2 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: E48083DA14773DD3C2DB6ECC31524807
File Format: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
File Name: w2k3_a01.exe
File size: 161.26 KB
Supported Operating Systems
Installation instructions
Custom Instructions for w2k3_a01.exe:
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to upzip the files.
4. Click on the OK button to extract files.
5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Windows Server 2003 Fresh Installation
Follow the instructions in this section if you are performing a new installation of Windows Server 2003 and you wish to boot from a device attached to the SiI 680 controller.
1. Put your Windows Server 2003 CD into the CD-ROM/DVD drive
2. Press F6 for third party SCSI or driver installation at the beginning of text mode installation. Press 's' when setup asks if you want to specify an additional device, and insert the diskette labeled 'Silicon Image ATA/133 Driver Installation Disk'.
Press 'Enter' and select
'Silicon Image SiI 0680 ATA/133 Controller'
3. Press 'Enter' to continue on with installation
Verifying controller installation under Windows Server 2003
Follow the instructions in this section to verify that the controller was installed correctly
1. Right click on 'My Computer' icon, select 'Properties', left click on 'Hardware' tab, and then on 'Device Manager' button.
2. Double click on 'SCSI and RAID Controllers', verify that the SiI 0680 ATA/133 Controller is listed.
Updating the driver on Windows Server 2003
1. Right click on 'My Computer' and select 'Properties'. Under the 'System Properties' section, click on 'Hardware' tab, and then on 'Device Manager' click 'SCSI and RAID Controller' and right click ' Silicon Image SiI 0680 ATA/133 Controller'.
2. Click 'Driver','Update Driver' and select 'Search for a suitable driver for my device[Recommended]'. Insert the driver diskette into floppy drive. Click 'Next' and complete the driver installation.
3. System will go through the enumeration process and install the driver. At the end of the process, click 'Yes' to reboot your system when necessary.