Dell PERC 5/E Adapter, PERC 5/i Integrated, PERC 5/i Adapter, PERC 6/E Adapter, PERC 6/i Integrated, CERC 6/i Integrated, PERC 6/i Adapter, PERC 6/i Integrated Blade driver version 2.23.0.32, A06

There are a few ways to install this driver package. Steps on how to use DUP and ZIP files are listed below. Refer to the release note of this package for detailed install instructions on other methods.

Dell Update Package :

Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update


Hard Drive Installation (via WinZip) with Setup.exe File
Download
1.Click Download now, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install
1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to a specific path. Write down this path so the executable (I.e.Setup.exe) file can be found later, or specify your own path.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Navigate to the path where the files where extracted.
7. Double click the exe file.
8. Follow the on-screen installation instructions.

Reboot will be required