Driver Details

Dell Command | Configure

This package provides Dell Command | Configure Application and is supported on Venue 11 Pro, XPS, OptiPlex, Precision, Latitude Dell Embedded Box PC 3000 and 5000 that are running the following Windows operating systems: Windows 10, Windows 8.1, Windows 8 and Windows 7.

Fixes & Enhancements

-Not Applicable
Support for new platforms:
- Dell Embedded Box PC 3000 series
- Dell Embedded Box PC 5000 series
Support for Windows 7 Professional FES
Support for Windows IoT Enterprise LTSB
Support for the following new BIOS attributes:
- Always allow dell docks
- BIOS Recovery
- CANBus
- Enclave Memory Size
- IO Module
- On Board Sound Device
- Serial Port 3
- Serial Port 4
- Serial Port 5
- Serial Port 6
- Thunderbolt boot support
- Thunderbolt Pre-boot Modules
- Touchscreen
- TPM Hash Algorithm
- UEFICapsule
- Wake on dock
- Warnings And Errors
- WLAN Region Code
Support for new possible values for the following supported attributes:
- Serial Port 1
- Serial Port 2


Version 3.1.2, A00


Systems Management

Release date

09 Aug 2016

Last Updated

09 Aug 2016


Available formats

File Format:Update Package for Microsoft® Windows®
File Name:Systems-Management_Application_78Y3Y_WN32_3.1.2_A00.EXE
Download Type:HTTP
File Size: 28 MB
Format Description:Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
Installation instructions
Dell Update Package (DUP) instructions


1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.


1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update
Important Information
This package contains Dell Command | Configure 3.1.2.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).