Intel NIC Family Version 19.0.0 Firmware for I350, I354, X520, X540, and X550 adapters

FW downgrade on X550 devices to 18.5.x or older versions is not supported.

For the following adapters based on the Intel(R) Ethernet Controller X520, upgrading the firmware
from 18.5.17 to new versions may cause link issues with optics modules or active optical cables. An AC power
cycle is required to resolve the link issues.
- Intel(R) 10GBE 2P X520 LOM
- Intel(R) Ethernet 10G 4P X520/I350 rNDC
- Intel(R) Ethernet 10G 2P X520 Adapter

----------------------------------------------------------
* To perform an AC power cycle, you must do the following:
----------------------------------------------------------
1. Shut down the system if it is powered up
2. Unplug all AC power cords from the system
3. Leave the AC power cords unplugged for 15 seconds to drain power from the system
4. Plug in AC power cords to the system

====================================
Windows Update Package Installation:
====================================
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

====================================================
[Alternative] Installation via Lifecycle Controller.
====================================================
1. Copy the downloaded firmware DUP for Windows to removable USB storage.
2. Insert the removable USB storage in a USB port of the server to be updated.
3. Reboot the server.
4. Press the F10 key to enter Lifecycle Controller.
5. In the left navigation pane, click Firmware Update.
6. In the main pane click Launch Firmware Update.
7. On the Step 1 of 3: Select Update Repository page, select Local Drive.
8. Click the Next button.
9. On the Step 2 of 3: Enter Access Details page, select the removable USB storage from the Local Drive drop-down list.
10. Type the path and filename of the firmware DUP in the File Path or Update Package Path text box.
Example: \Network_Firmware_GK57C_WN64_19.0.12_A00.exe
11. Click the Next button.
12. On the Step 3 of 3: Select Updates page, select the checkbox next to one, or more, of the Available System Updates.
13. Click the Apply button to complete the installation process.

==================================
Linux Update Package Installation:
==================================
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Make sure that the network adapter's base driver is loaded in the OS
2. Read over the release information presented by executing the
./Network_Firmware_GK57C_LN_19.0.12_A00.BIN --version command from the shell.
3. Download and install any prerequisites identified in the above step before proceeding.
4. Run the update by executing ./Network_Firmware_GK57C_LN_19.0.12_A00.BIN from the shell.
5. Follow the remaining prompts to perform the update.

GnuPG Signature of Dell Update Package Instructions for Network_Firmware_GK57C_LN_19.0.12_A00.BIN:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do this once on your system)
2. Verify the Dell Update Package by using its signature file, Network_Firmware_GK57C_LN_19.0.12_A00.BIN.sign