Driver Details

Dell Command | Configure

This package provides Dell Command | Configure application and is supported on Dell Embedded Box PC 5000 series and Dell Embedded Box PC 3000 series that are running Ubuntu 16.04 operating sustem.

Fixes & Enhancements

Initial Release.


Version 3.1.2, A00-00


Systems Management

Release date

09 Aug 2016

Last Updated

09 Aug 2016


Available formats

File Format:GNU-Zip
File Name:command_configure-linux-3.1.2-118.x64.tar.gz
Download Type:HTTP
File Size: 622 KB
Format Description:This format consists of gnu zip files for software installation.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Ubuntu Desktop 16.04
Installation instructions
Dell Command | Configure .tar.gz file instructions

1. Click Download File to download the file.
2. When the file download window appears. Click Save to save the file to your hard drive.

1. The HAPI client side shared libraries 8.3.0 is installed.
2. You have root access on the target system. This means that you must be authenticated on the target system as a user who is a member of the root user group

Installation: To install Dell Command | Configure, perform the following steps:
1. In the Linux command line interface, run the following command to extract contents from command_Configure-linux-9.1.2-.tar.gz.

tar -zxvf command_Configure-linux-9.1.2-.tar.gz

The command_Configure-linux-9.1.2-.tar.gz contains the following packages that must be installed in the following order:
a. srvadmin-hapi_8.3.0-1_amd64.deb
b. command_Configure-linux-3.1.2-.x64.deb

2. To install HAPI, run

dpkg -i srvadmin-hapi_8.3.0-1_amd64.deb

NOTE: If the installation fails due to dependency problems, then run the following command to install all dependent packages from the Ubuntu repository:

apt-get -f install

3. To install Dell Command | Configure, run

dpkg -i command_Configure-linux-9.1.2-.x86_64.deb

4. To verify that the Dell Command | Configure is installed in your system, run

dpkg - | grep command-Configure

NOTE: If Dell Command | Configure details are displayed, then the installation is successful.
Important Information
This package contains Dell Command | Configure 3.1.2.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).