AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
iDRAC with Lifecycle Controller v. 2.15.10.10
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Enhancements: -Support for the following PowerEdge systems: - PowerEdge FC430 - PowerEdge FD332
-Support for using single iDRAC firmware across Dell 12th and 13th generation PowerEdge servers.
- Support to switch the controller mode from RAID to HBA and back on PERC 9.1 and later controllers.
- Enables SSL encryption between client and server using 256 bit or higher.
- Added racadm proxy support for PowerEdge FX2 chassis. Allows an iDRAC administrator utilizing Chassis Management at Server (CMAS) to issue a racadm command to CMC using iDRAC.
- Added event proxy support for PowerEdge FX2 chassis. Allows an iDRAC managing a PowerEdge FX2 CMC utilizing CMAS to display CMC events.
- Added support for iDRAC Shared LOM on PowerEdge FX2 chassis.
- Upgraded OpenSSL v1.0.1j; response to CVE-2014-3566 for the "POODLE" issue.
- Upgraded OpenSSH v6.6; response to CVE-2010-5107, CVE-2014-2532.
- Added support for QLogic BCM57xx and BCM57xxx NIC cards.
- Added support for Intel Ethernet Network Adapters X710.
- Added support for the following Emulex network cards: - Emulex OneConnect OCe14102-U1-D 2-port PCIe 10GbE CNA - Emulex OneConnect OCm14104-U1-D 4-port 10GbE rNDC CNA - Emulex OneConnect OCm14102-U5-D 2-port 10GbE Mezz CNA - Emulex OneConnect OCm14102-U4-D 2-port 10GbE bNDC CNA - Emulex OneConnect OCe14102-N1-D 2-port PCIe 10GbE NIC - Emulex OneConnect OCm14104-N1-D 4-port 10GbE rNDC NIC - Emulex OneConnect OCm14102-N5-D 2-port 10GbE Mezz NIC - Emulex OneConnect OCm14102-N6-D 2-port 10GbE bNDC NIC
Fixes: - VNC password is not retained in iDRAC after an iDRAC reboot.
- Assertion of PSx-PG-Fail in the SEL is automatically de-asserted upon recovery of PSU-Good or removal of related PSU.
- The BIOS configuration job completes with errors when the Virtualization Technology setting is changed. The job status displays an error though the settings are successfully applied.
- The WS-MAN interface stops functioning when running several WS-MAN sessions simultaneously.
- Auto Config may not apply the XML configuration changes if the host system is turned on or while using the Enable Once After Reset DHCP provisioning option.
- iDRAC network access issues after iDRAC configuration is reset to the factory defaults.
- iDRAC network access issues using shared LOM on PowerEdge FC430 servers.
- Reset to default on Dell PowerEdge M820 results in an unexpected behavior. The IP on the system displays as IP on the system is 192.168.0.120 instead of 0.0.0.0.
- On a system with an ID module installed, the ID module network settings are not configured properly during the initial ID module installation and after performing a reset to default.
- Fans run at full speed on systems with mixed PERC cards - one PERC card with battery and another card without battery.
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
File Format:An archive of PDF files to provide help and procedural information to the customers
File Name:iDRAC_ 2_15_10_10_A00_ReleaseNotes.pdf
File Size:207.81 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Download 1. Click Download Now to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive. Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update