Driver Details

Intel Device Manager Diagnostics Utility

This package provides the Intel Device Manager Diagnostics Utility and is supported on the OptiPlex, Precision and Latitude models that are running the following Windows Operating Systems: Vista (64-bit), Windows 7 (64-bit) and Windows 8 (64-bit).

Fixes & Enhancements

Initial release.


Version, A09



Release date

20 Jun 2013

Last Updated

30 Nov 2015


Available formats

File Format:Hard-Drive
File Name:DIAG_Network_Intel_A09_x64-YMH42_setup_ZPE.exe
Download Type:HTTP
File Size: 24 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows 7, 64-bit
Windows 8, 64-bit
Windows 10, 64-bit
Windows Vista, 64-bit
Applies to
Intel 825xx 10/100/1000 Ethernet Network
Intel 825xx 10/100/1000 Ethernet Network Device
Intel 825xx Gigabit Ethernet Controller
Intel 825xx Gigabit Platform LAN Network Device
Intel Device Manager
Intel Device Manager Diagnostics
Intel Device Manager LOM
Intel Ethernet Controller
Intel I2xx/825xx Gigabit Platform LAN Network Device
Intel T3600 Network
Intel T5600 Network
Intel T7600 LOM
Installation instructions
Hard Drive Installation (via WinZip) with Setup.exe File


1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.


1. Double-click the new icon on the desktop.
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\YMH42". (Where 'YMH42' is the name of the file to be downloaded). Write down this path so the executable (i.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\YMH42" (where 'YMH42' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).