Driver Details

Seagate ST1000LM035 and ST2000LM007 series Hard Disk Firmware Update

This package provides the firmware for Seagate ST1000LM035 1TB and ST2000LM007 2TB Hard Disk Drive, Revision SDM2, and is supported on Inspiron, Vostro, XPS, Optiplex, Alienware and Precision models running the following Windows operating systems: Windows 7, Windows 8, Windows 8.1 and Windows 10.

Fixes & Enhancements

Fixes:
- Fixed the system hang or BSOD issue caused by sudden power lost.

Enhancement:
- Improved cache management algorithm and reduced the OS installation time.

Version

Version SDM2, A01

Category

Serial ATA

Last Updated

11 Jul 2018

Importance

Available formats

File Format:Hard-Drive
File Name:Seagate ST1000LM035_ST2000LM007 0D4C3_ZPE.exe
Download Type:HTTP
File Size: 53 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
0c8eb25b767fc84ab23f0745bfe33509
SHA1:
ae1a90f9cac6ad1e57ce6f0c008227bd4db22063
SHA-256:
dca681c564bca3489b3d4f104326ec43d2a765e646c28ffdbace3af395662d73

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
Installation instructions
Download

1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.

------------------------------------------------------------------------------------------

Firmware upgrade through the Windows utility for 1TB Hard Disk Drive ST1000LM035

1. Download and execute Seagate ST1000LM035_ST2000LM007 0D4C3_ZPE.exe.
2. Select Continue and take note of the unzip location.
3. Run Seagate ST1000LM035 0D4C3.exe as administrator if you want to update firmware for 1TB hard disk drive.
4. On the first screen you will select your language, and then select OK.
5. Select Next on the welcome screen.
6. The next screen is a warning screen, please read and select Next if you agree.
7. The next screen is the License Agreement screen. If you agree, click "I agree" and then click Next.
8. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click Proceed.
9. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally.
10. To confirm the firmware update was successful, open Device manager -> open Disk Drives-> Select ST1000LM035 -> click Properties -> choose hardware ID under Details and check the firmware version.

------------------------------------------------------------------------------------------

Firmware upgrade through the Windows utility for 2TB Hard Disk Drive ST2000LM007

1. Download and execute Seagate ST1000LM035_ST2000LM007 0D4C3_ZPE.exe.
2. Select Continue and take note of the unzip location.
3. Run Seagate ST2000LM007 0D4C3.exe as administrator if you want to update firmware for 2TB hard disk drive.
4. Select Next on the welcome screen.
5. The next screen is a warning screen, please read and select Next if you agree.
6. The next screen is the License Agreement screen. If you agree, click "I agree" and then click Next.
7. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click Proceed.
8. A Seagate Firmware Update Setup window will pop-up to show drive updating firmware status. Once the firmware update is complete, click next to the next window.
9. Window will show Download Complete Status. Click Finish to exit application.
10. Perform system shutdown and power on the system again
11. To confirm the firmware update was successful, open Device manager -> open Disk Drives -> Select ST2000LM007 -> click Properties -> choose hardware ID under Details and check the firmware version.

------------------------------------------------------------------------------------------
Important Information
WARNING: As with all firmware updates, it is strongly recommended that you backup or make copies of all important files before performing this update. This firmware update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the firmware process is interrupted for any reason, your hard disk drive may not function properly.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.