Driver Details

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell Inspiron 7737 System BIOS

This package provides the Dell System BIOS update and is supported on Dell Inspiron 7737 System BIOS models running the following Operating System: Windows and DOS.

Fixes & Enhancements

Fixes
- Updated SMM runtime support.

Enhancements
- Not Applicable.

Version

Version A14, A14

Category

BIOS

Release date

17 Nov 2016

Last Updated

17 Nov 2016

Importance

Available formats

File Format:Windows/DOS
File Name:7737A14.exe
Download Type:HTTP
File Size: 10 MB
Format Description:This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
fcb4283cb1086147bdebbb36ca6ec69c
SHA1:
f6c31b88cf8a0151dcafa37422d1db3dd7b2143e
SHA-256:
68c6ceb98acb9e68215087dc651d8cc3e9a40427242850ae51b7c1f670da3a80

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
Intel Rapid Storage Technology
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears,click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.


Run the BIOS update utility from DOS environment,if Legacy Boot mode
1.Copy the downloaded file to a bootable DOS USB key.
2.Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3.Run the file by typing copied file name where the executable is located.
4.DOS System will auto restart and update BIOS while system startup screen.
5.After BIOS update finished,system will auto reboot to take effect.

Run the BIOS update utility from DOS environment,if UEFI Boot mode with Load Legacy Option disabled
1.Copy the downloaded file to a bootable DOS USB key.
2.Power on the system, then go to BIOS Setup by pressing F2 and go to Boot_Boot List Option.
3.Change UEFI to Legacy of Boot List Option.
4.Go to Exit_Exit Save Changes and reboot system.
5.Press F12,then Select USB Storage Device and Boot to DOS prompt.
6.Run the file by typing copied file name where the executable is located.
7.DOS System will auto restart and update BIOS while system startup screen.
8.After BIOS update finished,system will auto reboot.
9.Go to BIOS Setup by pressing pressing F2 and go to Boot_Boot List Option.
10.Change Legacy to UEFI Boot Option.
11.Go to Exit_Exit Save Changes and reboot system
--------------------------------------------------------------------------------
Note 1:You will need to provide a bootable DOS USB key.This executable file does not create the DOS system files.
Note 2:Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).