Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 5451_A03.exe
File size: 22.28 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 671fd782649297c5d910fe906a76ac37
SHA1: 0f373cdb61bf6cb55855d01a4fcbf05d193f1e4c
SHA-256: 8c0d9381ec427cd1ddd771b2c2f3806443495fe02ea5fdbf4a5c251d7c2eb514
Fixes & Enhancements
Enhancements:
- Keep register setting of KSI/KSO to avoid keyboard lose issue.
- Enhance F2/F12 hotkey function after restart from OS.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
[Download]
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
9. Change "Legacy" to "UEFI" Boot Option.
10. Go to "Exit > Exit Save Changes" and reboot system.
-----------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the?DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required